All pages
From Kolmisoft Wiki
Jump to navigationJump to search
- * button does not work
- 102 - Recovery on timer expiry
- 2008.02.20 Joomla addon Developer chat
- 2008.02.22 Joomla addon - Thoughts on structure
- 200 MOR can't determine who is calling
- 201 User is blocked
- 202 Reseller is blocked
- 203 No rates for user
- 204 No suitable providers found
- 205 MOR PRO not authorized to work on this computer
- 206 server id is not set in mor.conf file
- 207 Not clear who should receive call
- 208 MOR can not make more calls
- 209 Test time exceeded
- 210 Balance more then 0, but not enough to make call 1s in length
- 211 Low balance for user
- 213 Low balance for DID owner
- 214 Too low balance for DID owner for more simultaneous calls
- 215 Low balance for reseller
- 216 Too low balance for reseller for more simultaneous calls
- 217 Callback not initiated because device not found by ANI
- 218 Reseller does now allow loss calls
- 219 DID has reached call limit. No more calls allowed to this DID
- 220 User call limit reached
- 221 Device call limit reached
- 222 Resellers call limit reached
- 223 Providers call limit reached
- 224 Provider skipped because his rate is higher then users rate
- 225 CallerID is banned
- 226 DID is free
- 227 Calling Card PIN is not entered
- 228 Calling Card Destination is not entered
- 229 DID is reserved
- 230 Connection returned error code 0 instead of real code
- 231 Provider unreachable
- 232 Callback DID not available
- 233 Skype Addon Disabled
- 234 Internal Loop
- 235 Providers rate higher by percent
- 236 Callback initiation too early
- 237 DID User is blocked
- 238 Provider used its daily call time limit
- 239 Device used its daily call time limit
- 239 Deviec used its daily call time limit
- 240 Provider belongs to the User which makes call
- 241 Local Caller canceled the call before call was answered
- 242 No Rates for Reseller
- 246 Duplicate call hangup
- 247 Dead Provider skipped
- 248 Call was terminated because FAS(False Answer Supervision) control detected an issue
- 248 Call was terminated because FAS(False Answer Supervision) control detected an issue.
- 265 Provider skipped because rate margin is lower than allowed
- 2Checkout.com technical details
- 2 Server Redundant Solution
- 2 server redundant solution
- 301 Originator not found
- 302 Global Call Limit reached
- 308 Dial Peer not found
- 309 Origination Point is not active
- 310 Suitable Terminator not found
- 312 Caller canceled the call
- 316 Freeswitch did not find termination point details
- 342 Global Incoming System CPS limit reached
- 343 Too many hops
- 344 Terminator reached call limit in a Dial Peer
- 345 Terminator reached CPS limit in a Dial Peer
- 346 Call terminated by hangup command
- 347 Duplicate CallID/UniqueID
- 349 Vendor is blocked
- 34 no circuit/channel available
- 350 MNP search error
- 351 MNP CIP does not match TP
- 353 LNP search error
- 3CX PBX interconnection with M4
- 3CX PBX interconnection with MOR
- 3CX registration fails
- 41 temporary failure
- 487 Request Terminated by bye or cancel
- 4 server redundant solution
- 58 - Bearer capability not presently available
- AMI Connection
- ANI/CLI ban system
- ANSWER(312) with billsec 0
- API Access Denied
- API Configuration
- API returns garbage
- API returns results without checking hash
- API specification to be implemented in the future
- ASR/ACD
- ATI - IDT Express Template
- ATI - Speedflow example
- ATI - Tata Template
- ATI - Tata example
- ATI - Voicetrading Template
- ATI - Voicetrading example
- ATI - Voxbeam Template
- A UNIQUE INDEX must include all columns in the table's partitioning function
- Access Denied
- Access to fetch has been blocked by CORS policy
- Accountant cannot create device
- Accountant cannot see assigned permission objects
- Accountant permissions
- Accounting
- Action log
- Active Calls
- Active Calls Graph
- Active Calls do not start from 00:00:00
- Additional Asterisk Server
- Advanced Rates
- Advanced Rates for Users
- Advanced Routing Addon
- Aggregate
- Aggregates Regeneration
- Alaw2g729 stress test
- Alert Contacts
- Alert Groups
- Alert Schedules
- Alerts
- Allow loss calls
- Allowed Addresses
- Amazon S3 Backups
- App mor.so version
- Archived Calls in Files
- Archived calls
- Assign DID to Trunk
- Asterisk Background performance test
- Asterisk CLI
- Asterisk CLI debug
- Asterisk Languages
- Asterisk can't connect to MySQL database
- Asterisk displays wrong time
- Asterisk eats all CPU
- Asterisk ended with exit status 1 Asterisk died with code 1
- Asterisk is slow
- Asterisk keepalive script
- Asterisk modules are not loading
- Asterisk shows error handle tcptls connection: Certificate did not verify: self signed certificate
- Asterisk stops working with Internet loss
- Asterisk under NAT
- Asterisk versions not compatible with MOR
- Authentication
- Authorization by ANI
- Authorization by ANI + CallCard on one DID
- Authorization by PIN
- Authorization by PIN asks for PIN when "Use ANI?" is enabled
- Authorize net tech details
- Auto-Dialer Addon
- Autodialer poll example
- Automatic Backups do not work
- Automatic CDR Export
- Automatic Tariff Import
- Automatic Tariff Import - Email is not taken from the mailbox
- BUSY state not triggered
- BYE is not forwarded
- Background Tasks
- Backup old Calls
- Backup system
- Bad CSV rate file examples
- Bad group name apache FAILED
- Bad magic number for object. Object is likely destroyed.
- Balance, Calls and Invoices are zero
- Balance API returns "Feature disabled"
- Balance and Credit
- Balance in phone
- Balance troubleshooting
- Basic Structure with Reseller feature
- Basic and OLD Call Shop functionality
- Billing Concepts
- Billing Concepts (ru)
- Billing Logic
- Block and Hide Devices
- Block some Destination to Provider
- Block some Destination to User
- Block user at selected date
- Block wrong short numbers with Localization
- Blocked Countries
- Blocked Countries blocks email server
- Blocked Countries installation problem. Please contact Support in order to solve it
- Blocked IPs
- Blocked Numbers
- Blocked Rates
- Blocking SIP Scanners
- Broadvoice configuration
- Bulk change Tariffs for Users
- Business Model - Calling Cards
- Business Model - Charging for phone support or consultations
- Business Model - Free dialing when DID covers Call price
- Business Model - Free dialing when commercial covers Call price
- Business Model - GSM Termination
- Business Model - Hosted Softswitch or Switch Partitioning
- Business Model - Telecom Expense Management
- Business Model - Voice Broadcasting
- Business Model - Voice Traffic Transit (Wholesale)
- Business model - Hosted Softswitch or Switch Partitioning
- Busy Lamp Field (BLF)
- C2C Addon Campaign
- C2C Addon Comments
- C2C Greeting
- CDMA support
- CDR Disputes
- CDR Duration
- CDR Export Templates
- CDR Import
- CDR Import Templates
- CDR Rerating
- CDRs are exported in wrong time zone
- CLIR for ZAP channels
- CLIs
- CLIs (Incoming CallerIDs)
- CPS Calls Per Second
- CPS Limit
- Call Count Bigger That What We Can Process
- Call Flow
- Call Info
- Call Queues
- Call Routing by price
- Call Routing by priority (Manual LCR)
- Call Shop Addon
- Call Shop functionality
- Call Tracing
- Call connections are slow
- Call dropped upon connection
- Call duration mismatch between CDR and GUI
- Call ends with message 'Login failed'
- Call explained
- Call export to CSV does not work
- Call failed
- Call hangs after 15 minutes
- Call hangs after 1 second
- Call hangs after 2 hours
- Call hangs after 30 minutes
- Call hangs after 30 seconds
- Call hangs after 60 seconds
- Call hangs after 8 seconds
- Call is going but not visible in Active Calls
- Call is no going through and not shown in Last Calls
- Call is not going through and not shown in Last Calls
- Call list
- Call log explanation
- Call rejected, CallToken Support required.
- Call rejected by IP: No authority found
- Call rejected by IP: No such context/extension
- Call routing per callerID basis
- Call routing per destination basis
- Call was billed incorrectly
- Call with video support enabled fails
- Callback
- Callback Addon
- Callback Dial Plan
- Callback and Calling Cards
- Callback over Email
- Callback over Email does not work
- Callback setup example
- CallerID is not dropped if balance is zero
- CallerID not passed
- Caller is not able to join the queue
- Calling Card Dial Plan
- Calling Card Distributor
- Calling Card Groups
- Calling Card Panel
- Calling Card aggregate
- Calling Card logic
- Calling Card management
- Calling Card prices are changing everyday
- Calling Card setup example
- Calling Cards Addon
- Calling Cards External Script
- Calling Cards Ghost Minutes External Script
- Calling Cards Payments
- Calling Cards Search
- Calling Cards Settings
- Calls are not recorded
- Calls by Source
- Calls do not work after glibc update
- Calls from Admin and from User perspective
- Calls in invoice and last calls/country stats do not match
- Calls of NEC PBX are propped after few seconds
- Calls per Day
- Calls per Hour
- Calls using ZAP/DAHDI are not working
- Callshop video
- Cals from Admin and from User perspective
- Can't activate registration confirmation
- Can't initiate web callback
- Can't login
- Can't open GUI
- Can't open phpMyAdmin
- Can't send email
- Can't setup callback
- Can I customize layout of PDF Invoice
- Can I have a hostname for MOR
- Can not see more than 100 active calls from GUI
- Can user increase another user balance?
- Cannot Connect From Certain IP
- Cannot Edit Provider
- Cannot See Calls From Originator
- Cannot access Recordings in GUI
- Cannot check balance for Calling Card over IVR
- Cannot connect to Asterisk Server
- Cannot connect to Elasticsearch
- Cannot connect to Radius
- Cannot create FAX device
- Cannot download Fax PDF from GUI
- Cannot generate Invoice
- Cannot generate PDF
- Cannot make calls from FreePBX
- Cannot see device status on MOR11
- Cannot see original CallerID
- Cant dial to *9901
- Card Number/PIN is not recognized
- Card PIN is not recognized
- Card TopUp
- Card import from CSV file
- Card not found
- Cause No. 18 - no user responding
- Cause No. 20 - subscriber absent
- Centos7 installation
- Centos 6 repositories does not work anymore
- Centos installation
- Chan sip.c:1786 sip xmit: sip xmit of 0x81cbc78
- Chan sip.c: sip xmit of 0x7f6e367cede0
- Chan skype.so problems
- Change Audio/Video Codecs priority
- Change HGC for a User
- Change Tariff for Connection Points
- Change default passwords
- Change flag for translation
- Channel sent into invalid extension 's' in context 'mor callingcard', but no invalid handler
- Charging for phone support or consultations
- Check GUI log
- Check RAID status
- Check if downloaded file is not corrupted
- Check server compatibility
- Cisco Gateway Settings
- Cisco Spa 122
- Click2Call
- Click2Call Addon example
- Click2Call Fast Start
- Click2Call Specification
- Click here.
- Client not receiving incoming calls
- Client portal on Joomla integration page
- CloudPBX Recommended hardware
- Cloud PBX
- Cloud PBX Create device
