LCR

Description

LCR (Least Cost Routing) is a set of Providers that should be used to send a call when trying to dial any destination - for example, by the cheapest rate.

The correct name for such a function is a Routing Table, because the function supports other ways of routing, not just finding the cheapest route.

By default LCR supports fail-over. That is, if one provider fails, the next one is dialed. This is completely invisible for the caller and lets you increase the chances of the user reaching his destination. If one Provider is not capable of delivering a call, the system will try to use the remaining Providers.

Fail-over explanation

With such configuration:



System will do following:

• system tries to use "Kolmisoft PREMIUM";

• if above fails, system tries to use "Kolmisoft STANDARD";

• end.

With such configuration:



System will do following:

• system tries to use "Kolmisoft PREMIUM";

• end.

With such configuration:



System will do following:

• system tries to use "Kolmisoft PREMIUM";

• if above fails, system tries to use "Kolmisoft STANDARD";

• if above fails, system tries to use provider "112" even if its rate is higher than User rate;

• end.

Usage

Go to SETTINGS –> Billing –> LCR



Here you can see the list off all LCRs

• Name – name of LCR.
• Order – type of routing mode.
• Providers – quantity of providers in LCR. Click on it to Add Providers to LCR
• By destination
• Usage Details – the list of Users and Card Groups where this LCR is used.
• Make Tariff from LCR Providers to CSV – feature that gets you a CSV with the MIN/MAX prices selected from the list of Providers in LCR. Click on the icon and the download should start automatically. (De-activated provider will be taken into CSV. "by Destination" will not be taken into CSV)
• LCR copy – press on icon to make LCR copy.

Supported routing modes

• By Price - cheapest first (Least Cost Routing).
• By priority.
• By percent or Weight-based routing.

The user has one base LCR, so that all his calls are routed by some preset rule.

It is possible to route different destinations for a User using Call routing per destination basis.

Creation

Press New LCR to create LCR.

Additional Configuration

Go to LCRs list and press icon.



First Providers percent limit - visable when order by Price is selected. If following Providers will have higher price by this percent compared to first Provider, these Providers will be skipped. 0 value disables use of this setting.
Minimal Rate Margin Percent - use only those Providers which generate profit (per minute) equal or higher than defined percentage value in this field. For example, if you pay to your Provider 1 EUR/min and your Minimal Rate Margin Percent is set to 50%, then only calls with user rate equal or higher than 1.5 EUR/min are allowed to call. After 1 min of call, you will pay 1 EUR to you provider and user will pay you 1.5 EUR. Your profit will be 0.5 EUR which is 50% more of what you paid to your Provider. If you Minimal Rate Margin is -30%, then you allow some losses in your calls. If you pay 1 EUR to your Provider after 1 minute of call, then user should pay you 0.7 EUR or more. You will pay 1 EUR and you will get 0.7 EUR which is 30% less of what you paid.

LCR Time Periods

Sometimes there is such demand to change LCR for some time period. This functionality gives you an ability to do that. In LCR edit page time periods can be set.

Time period defines the exact time period LCR will be active. There is a limit of five periods in one LCR. Rest of the time will be used main LCR.

Examples

1. Select Date from 1 of January to 28 of February and choose Hour : Minute from 09:00 to 18:59. Selected LCR will be used from 1 of January till 28 of February at time from 09:00 till 18:59.
2. Select just Hour : Minute from 19:00 to 08:59 and selected LCR will be used every day at time from 19:00 till 08:59.
3. Select Weekday from Monday to Friday and choose Hour : Minute from 13:00 to 15:59. Selected LCR will be used every week from Monday till Friday at time from 13:00 till 15:59.

Copying LCRs between resellers

Sometimes you need to make a LCR which takes quite a long time to make. If you have made a similar one before you can just copy it and change appropriate details.

Go to SETTINGS -> Billing -> LCR -> Copy LCR



You will see this window:



Choose Original LCR reseller and Cloned LCR reseller and click Clone button.

Please note that LCR will not be allowed to copy if reseller B is not allowed to use Providers which are used by Reseller A.

See also

• LCR Logic
• How to add Provider to LCR
• Call Routing by price
• Call Routing by priority
• Call Routing by percent or Weight-based routing
• Call routing per destination basis
• LCR/Tariff change based on call prefix
• Why was a call not routed through another provider/trunk?
• Make Tariff from LCR Providers to CSV