Example - Configuring DID to ring some Device

Primary situation

We have:

• DID - an external number (02180995165) provided by a Provider.
• The number is from the UK.
• The connection to the provider is via IAX2, IP: 23.45.67.89:4569.
• Devices SIP/201 and SIP/202.

We want:

• To dial the DID 02180995165 using our mobile phone and ring Device SIP/201.

• To dial the DID 02180995165 using the local Device SIP/202 in order to ring Device SIP/201 (local SIP-SIP call not going to PSTN).

Configuration

Plan

1. Configure Localization for Provider.
2. Create Provider.
3. Register Provider.
4. Create Devices SIP/201 and SIP/202.
5. Create/Configure DID.

Configure Localization for Provider

As DID is not in E164 format, we must configure MOR to handle that.

That means that DID from provider comes in non-E164 format: 02180995165

We must create Location for this provider and add rule to it.

We create Location: UK and add rule to convert non-E164 DID to E164 DID: 02180995165 -> 4402180995165

Create Provider

Create Provider in MOR GUI.

Do not forget to set Location: UK for this Provider.

Register Provider

IF your Provider asks you to register, register it - do it.

Create Devices SIP/201 and SIP/202

Create Devices as usual (no need to edit any of .conf files!!!)

DO NOT forget to set Location: UK for these Devices.

Create/Configure DID

Create DID in E164 format

Reserve this DID to your User

Assign DID to Device SIP/201

That's it.