Example - Configuring DID to ring some Device

Primary situation

We have:

• DID - external number provided by some Provider: 02180995165
• Number is from UK
• Connection to provider is via IAX2, IP: 23.45.67.89:4569
• Devices we have: SIP/201 and SIP/201

We want:

• Dial DID (02180995165) using our mobile phone and ring Device SIP/201

• Dial DID (02180995165) using local Device SIP/202 and ring Device SIP/201 (local SIP-SIP call not going to PSTN)

Configuration

Plan

1. Configure Localization for Provider
2. Create Provider
3. Register Provider
4. Create Devices SIP/201 and SIP/202
5. Create/Configure DID

Configure Localization for Provider

As DID is not in E164 format, we must configure MOR to handle that.

That means that DID from provider comes in non-E164 format: 02180995165

We must create Location for this provider and add rule to it.

We create Location: UK and add rule to convert non-E164 DID to E164 DID: 02180995165 -> 4402180995165

Create Provider

Create Provider in MOR GUI (no need to edit any of .conf files!!!)

Do not forget to set Location: UK for this Provider.

Register Provider

IF your Provider asks you to register, register it in /etc/asterisk/iax.conf (or sip.conf if you connect to your Provider via SIP).

Create Devices SIP/201 and SIP/202

Create Devices as usual (no need to edit any of .conf files!!!)

Do not forget to set Location: UK for these Devices.

Create/Configure DID

Create DID in E164 format:

Reserve this DID to your User:

Assign DID to Device SIP/201

That's it.