All public logs

Combined display of all available logs of Kolmisoft Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)

11:05, 24 February 2026 Admin talk contribs deleted page Stress Test 2008-03-01 (content was: "* 2 x Quad-Core Xeon 5300 "clovertown" * 4 Gb RAM * Debian 4.0 * 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux * Asterisk 1.4.15 * canreinvite=no* * ~15% calls with transcoding (~85% calls no transcoding) * '''CPU busy 83% (17% idle)''' * Comments: ** Why channels/2 != calls? ** Because not all of them were connected ** and when the system is loaded...", and the only contributor was "Mindaugas" (talk))
11:05, 24 February 2026 Admin talk contribs deleted page Asterisk Background performance test (content was: " <big>'''Goal - to run at least 700 calls on this server.'''</big> == Hardware == * Local LAN with 100mb cheap DLink switch * Laptop to initiate calls over sipp * Tested server: [http://h10010.www1.hp.com/wwpc/lt/lt/sm/WF06b/15351-15351-3328412-3328421-3328421-3580694-3650542.html?jumpid=oc_R1002_LTLTC-001_HP%20ProLiant%20DL160%20G5%20E5405%202.0GHz%20Quad%20Core%201GB%20Non-Hot%20Plug%20SATA%20Rack%20Server&lang=lt&cc=lt HP Proliant DL160 G5 E5405] 1 x Q...")
11:04, 24 February 2026 Admin talk contribs deleted page Stress Test 2012-03-05 (content was: "= Results = {| border="1" cellpadding="5" cellspacing="0" | '''Transcoding G729-G711''' || '''Media Pass-through''' || '''Short Calls (Random 0-300s)''' || '''Reached calls''' |- | Image:icon_check.png|| Image:icon_check.png||Image:icon_check.png || ~250 |- | Image:icon_cross.png|| Image:icon_check.png||Image:icon_check.png || ~500 |- |Image...", and the only contributor was "Mindaugas" (talk))
11:02, 24 February 2026 Admin talk contribs deleted page Amazon S3 Backups (content was: "right Service is discontinued.")
10:58, 24 February 2026 Admin talk contribs deleted page M2 Users (content was: "#REDIRECT M4 Users", and the only contributor was "Admin" (talk))
10:58, 24 February 2026 Admin talk contribs deleted page M2 Termination Points (content was: "#REDIRECT M4 Termination Points", and the only contributor was "Admin" (talk))
10:58, 24 February 2026 Admin talk contribs deleted page M2 Tariffs (content was: "#REDIRECT M4 Tariffs", and the only contributor was "Admin" (talk))
10:57, 24 February 2026 Admin talk contribs deleted page M2 Routing Groups (content was: "#REDIRECT M4 Routing Groups", and the only contributor was "Admin" (talk))
10:57, 24 February 2026 Admin talk contribs deleted page M2 Rates (content was: "#REDIRECT M4 Rates", and the only contributor was "Admin" (talk))
10:57, 24 February 2026 Admin talk contribs deleted page M2 Quality Routing (content was: "#REDIRECT M4 Quality Routing", and the only contributor was "Admin" (talk))
10:56, 24 February 2026 Admin talk contribs deleted page M2 Origination Points (content was: "#REDIRECT M4 Origination Points", and the only contributor was "Admin" (talk))
10:55, 24 February 2026 Admin talk contribs deleted page M2 Dial Peers (content was: "#REDIRECT M4 Dial Peers", and the only contributor was "Admin" (talk))
10:53, 24 February 2026 Admin talk contribs deleted page M2 CDR Disputes (content was: "#REDIRECT M4 CDR Disputes", and the only contributor was "Admin" (talk))
10:52, 24 February 2026 Admin talk contribs deleted page M2 Aggregates (content was: "#REDIRECT M4 Aggregates", and the only contributor was "Admin" (talk))
10:51, 24 February 2026 Admin talk contribs deleted page M2-M4 Settings (content was: "#REDIRECT M4 Settings", and the only contributor was "Admin" (talk))
10:48, 24 February 2026 Admin talk contribs moved page Call Count Bigger That What We Can Process to M4 Call Count Bigger That What We Can Process without leaving a redirect
10:46, 24 February 2026 Admin talk contribs moved page Active Calls Graph to MOR Active Calls Graph without leaving a redirect
10:46, 24 February 2026 Admin talk contribs deleted page M2 Switch Stress Test (content was: "#REDIRECT M4 Switch Stress Test", and the only contributor was "Admin" (talk))
10:45, 24 February 2026 Admin talk contribs deleted page M4 Switch Stress Test (content was: "= Setup = Date: 17 March 2014 Tested on 1 server (Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz, 32GB RAM, 120GB SSD) 2 other servers as sender and receiver: Sender -> Test Server with M2 Switch -> Receiver Software used: sipp Core on Freeswitch with Radius = Results = * ~90 CPS with media without transcoding * ~600 calls with media transcoding (g726<->g722) * 1000+ calls with media without transcoding * 1600+ calls without media = Pictures = === 1188...")
10:43, 24 February 2026 Admin talk contribs moved page M2 Servers Stats to M4 Servers Stats without leaving a redirect
10:42, 24 February 2026 Admin talk contribs deleted page M2 How to make first call (content was: "#REDIRECT M4 How to make first call", and the only contributor was "Admin" (talk))
10:42, 24 February 2026 Admin talk contribs deleted page M4 10cc FREE Demo version (content was: "Download VM from: https://www.kolmisoft.com/m4-10cc Run VM in the VMWare: * [https://www.youtube.com/watch?v=Xdoy1fhzac4 WinRAR installation (Windows)] * [https://www.youtube.com/watch?v=O_N3un40J5M VMWare Player installation (Windows)] * [https://www.youtube.com/watch?v=wMJFLECjQ8o VM Launch] Login with root/kolmisoft Execute command: /usr/src/m2/maintenance/reconfigure_ip.sh W...", and the only contributor was "Admin" (talk))
10:41, 24 February 2026 Admin talk contribs deleted page M2 EU Roaming Regulations (content was: "#REDIRECT M4 EU Roaming Regulations", and the only contributor was "Admin" (talk))
10:38, 24 February 2026 Admin talk contribs deleted page M2 Active Calls (content was: "#REDIRECT M4 Active Calls", and the only contributor was "Admin" (talk))
10:19, 24 February 2026 Admin talk contribs deleted page M2 API hash construction (content was: "#REDIRECT M4 API hash construction", and the only contributor was "Admin" (talk))
10:17, 24 February 2026 Admin talk contribs deleted page 316 Freeswitch did not find termination point details (content was: "Hangupcause Code - 316. Freeswitch did not find termination point details This error happens when FreeSwitch is asked to dial the specific termination point, but FreeSwitch doesn't have any details about this termination point. How to solve this problem. First steps: cd /usr/src/m2/scripts/ svn update /usr/src/m2/scripts/m2_freeswitch_devices.c gcc -g -Wall -o m2_freeswitch_devices m2_freeswitch_devices.c -lcurl -lmysqlclient -lnsl -lm -lz -L/usr/lib/mysql -L/us...")
10:13, 24 February 2026 Admin talk contribs deleted page M2 Call Trace Does Not Work (content was: "If you click on Call Trace icon and it shows: "No Data found, Trace Call again", make sure ''/tmp/m2/m2_call_tracing'' directory exist on your server. If there is no such directory, use these commands: mkdir -p /tmp/m2/m2_call_tracing chmod 777 -R /tmp/m2/m2_call_tracing/", and the only contributor was "Rita" (talk))
10:12, 24 February 2026 Admin talk contribs deleted page M2 Codec Negotiation (content was: "This article explains how Codecs are negotiated in M2 system and ways to avoid transcoding. ==Originator Codecs== Codec list in Originator settings define which Codecs are accepted from Originator. ==Terminator Codecs== Codec list in Terminator settings define which Codecs will be offered when dialing Terminator (in the order they are listed). ==Codec order== By default M2 honors Codec order in SDP from Originator and Terminator. Originator Codec order depends on Originat...")
10:12, 24 February 2026 Admin talk contribs deleted page M2 Supported Codecs (content was: "G.711 alaw G.711 ulaw G.722 G.723.1 (passthrough only) G.726 G.729 (Annex A only) GSM Speex (8kHz using 20ms ptime) OPUS M2 supports SIP protocol only. =See also= * M2 Codec Negotiation * M4 Supported Codecs")
10:11, 24 February 2026 Admin talk contribs deleted page I have a problem with Freeswitch (content was: "* Freeswitch takes a lot of CPU * Freeswitch does not start * Many calls are transcoded", and the only contributor was "Admin" (talk))
10:11, 24 February 2026 Admin talk contribs deleted page Many calls are transcoded (content was: "Codec transcoding takes a lot of CPU cycles. = Quick Solution = Make sure ALL devices (OP and TP) have these settings set to Yes: File:fs_transcoded_settings.jpg Note that OP devices will have only first option available and TP devices only second option available. Mark them YES anyway. = Detailed problem description = == We have a problem == Example in which yo...", and the only contributor was "Admin" (talk))
09:13, 24 February 2026 Admin talk contribs deleted page Freeswitch does not start (content was: "= Stuck on Starting safe_freeswitch = Looks like this: service freeswitch start Starting safe_freeswitch and nothing happens anymore. Do: killall -9 safe_freeswitch killall -9 freeswitch killall -9 fs_cli service freeswitch start == Troubleshooting == killall -9 safe_freeswitch killall -9 freeswitch killall -9 fs_cli rm -fr /usr/local/freeswitch/run/freeswitch.pi...", and the only contributor was "Admin" (talk))
09:12, 24 February 2026 Admin talk contribs deleted page Freeswitch takes a lot of CPU (content was: "Check maybe Many calls are transcoded", and the only contributor was "Admin" (talk))
09:11, 24 February 2026 Admin talk contribs deleted page Freeswitch (content was: "Run in background: freeswitch -nc Stop: freeswitch -stop Restart: /etc/init.d/freeswitch restart (wait 30s until connecting to fs_cli, Freeswitch starts slowly) Connect to console: fs_cli (use 'console loglevel 6' for less debug output) Leave console: /bye or /quit or /exit M2 radius log: /var/log/radius/radius.log (alias: m2cli) SIP debug: sofia global siptrace on...", and the only contributor was "Mindaugas" (talk))
09:11, 24 February 2026 Admin talk contribs deleted page Freeswitch SNMP (content was: "= Freeswitch SNMP = Freeswitch SNMP module (mod_snmp) allows to access various Freeswitch parameters and channel information via SNMP = Installation = Freeswitch SNMP module can be installed by executing install script (works only in Kolmisoft M2 environment): svn update /usr/src/m2 /usr/src/m2/freeswitch/snmp/freeswitch_snmp_install.sh NOTE: Does not work on Centos 7 currently due to the MySQL version conflict (updates MySQL to v8, we need v5.7) Note that this script...")
09:10, 24 February 2026 Admin talk contribs deleted page Freeswitch Port Range (content was: "Default RTP ports are 10000-50000. If you want to change RTP ports, you should edit ''/usr/local/freeswitch/conf/autoload_configs/switch.conf.xml'' file (find these lines in file): <param name="rtp-start-port" value="10000"/> <param name="rtp-end-port" value="50000"/> And change 'value' to desired ports. For example, if your you want to allow RTP ports 10000-20000, the...", and the only contributor was "Edvardas" (talk))
09:09, 24 February 2026 Admin talk contribs deleted page Freeswitch under NAT (content was: "If your M2 box is under NAT, you should edit ''/usr/local/freeswitch/conf/sip_profiles/external.xml '' file (find these lines in file): <param name="ext-rtp-ip" value="auto-nat"/> <param name="ext-sip-ip" value="auto-nat"/> And change 'auto-nat' to your real external IP, for example, if your '''external IP''' is 1.2.3.4, these lines should look like this: <param name="ext-rtp-ip" value="1.2.3.4"/> <param name="ext-sip-ip" value="1.2.3.4"/> Forward SIP and RTP ports (UD...")
09:01, 24 February 2026 Admin talk contribs deleted page M2 Addons (content was: "#REDIRECT M4 Addons")
08:59, 24 February 2026 Admin talk contribs deleted page Rate Notifications (content was: "#REDIRECT M4 Rate Notifications", and the only contributor was "Admin" (talk))
08:57, 24 February 2026 Admin talk contribs moved page Rate Notifications to M4 Rate Notifications
08:57, 24 February 2026 Admin talk contribs deleted page M2 API (content was: "#REDIRECT M4 API", and the only contributor was "Admin" (talk))
16:13, 23 February 2026 Admin talk contribs deleted page Mysql reconnect: mor: Unknown connection error: (2006) MySQL server has gone away. (content was: "#REDIRECT Mysql reconnect: mor: Unknown connection error: (2006) MySQL server has gone away", and the only contributor was "Admin" (talk))
16:12, 23 February 2026 Admin talk contribs moved page Mysql reconnect: mor: Unknown connection error: (2006) MySQL server has gone away. to Mysql reconnect: mor: Unknown connection error: (2006) MySQL server has gone away
16:12, 23 February 2026 Admin talk contribs deleted page MySQL user creating and allow connecting from custom IP. (content was: "#REDIRECT MySQL user creating and allow connecting from custom IP", and the only contributor was "Mindaugas" (talk))
16:11, 23 February 2026 Admin talk contribs moved page MySQL permission problem. Contact Kolmisoft to solve it. to MySQL permission problem. Contact Kolmisoft to solve it without leaving a redirect
16:09, 23 February 2026 Admin talk contribs moved page Call rejected, CallToken Support required. to Call rejected, CallToken Support required without leaving a redirect
16:08, 23 February 2026 Admin talk contribs deleted page 248 Call was terminated because FAS(False Answer Supervision) control detected an issue. (content was: "#REDIRECT 248 Call was terminated because FAS(False Answer Supervision) control detected an issue", and the only contributor was "Vaidask" (talk))
16:05, 23 February 2026 Admin talk contribs moved page Bad magic number for object. Object is likely destroyed. to Bad magic number for object. Object is likely destroyed without leaving a redirect
15:01, 23 February 2026 Admin talk contribs deleted page Asterisk versions not compatible with MOR (content was: "== 1.4.16.x == Authentication by IP is broken: http://readlist.com/lists/lists.digium.com/asterisk-users/13/69038.html == 1.4.19.x/1.4.20.x == Crashes when realtime SIP peer is dialing: http://lists.digium.com/pipermail/asterisk-users/2008-April/209342.html and http://bugs.digium.com/view.php?id=12362 == 1.4.21.x == * Locks and does not respond: http://bugs.digium.com/view.php?id=12925 ** 1.4.21.1 has fixed this problem, but next problem does not allow to...")
14:59, 23 February 2026 Admin talk contribs deleted page Why we do not suggest to use IAX2 (content was: " '''Main reasons''': * IAX2 does not return correct HANGUP CAUSE codes! So solving interconnection problems between servers can be difficult. * IAX2 can only use 1 thread - that means it can't handle a lot of calls at one time. ---- '''Also:''' On Thu, 2008-03-27 at 14:38 -0400, Steve Totaro wrote: > IAX is junk. Never figured out what causes...", and the only contributor was "Mindaugas" (talk))

(newest | oldest) View (newer 50 | older 50) (20 | 50 | 100 | 250 | 500)

All public logs

Navigation menu

Page actions

Page actions

Personal tools

Navigation

Search

Tools