Mor.conf

This file is in /etc/asterisk/ and describes some values for app_mor.so application which is the main MOR core working in Asterisk environment.

• hostname, dbname, user, password, port, sock – all these values describes connection to database;
• min_frozen – Minimum credit left to allow simultaneous calls. If users balance is lower – he will not be able to make simultaneous calls (default 10); Not used starting from MOR 0.7.
• frozen_time – How much balance to freeze in minutes if user is prepaid (default 30). If user makes several simultaneous calls and he is prepaid – we need to „freeze“ some amount to be safe;
• show_notice, show_warning, show_error – sets debug level for app_mor.so application in Asterisk CLI;
• zap_change – change ZAP into something else in Asterisk to let use some custom made channels based on Zaptel;
• server_id – unique number for server identification;
• active_calls – tells app_mor.so to update info to DB related to calls currently on the system;
• dial_out_settings – global settings for Dial() command in Asterisk (rTt or similar);
• serial – serial key for activating app_mor.so
• use_lcr_partials - Should MOR be able to use LCR by destinations? Default 1
• global_call_timeout - Global timeout for calls in seconds, default 7200 seconds (2h)
• check_banned_clis - Should MOR check for banned CLIs? Default 1, Enables/Disables ANI/CLI ban system (available from MOR 0.8)
• play_hgc_audio - Should we play audio with error message when call fails? (default 0 if not set)
• use_flat_rates - Should MOR use Flat Rates, default 1
• use_speed_dials - Should Speed Dials be enabled

In order to activate changes made to this file you need to restart Asterisk or reload app_mor.so

• How to restart Asterisk server

Reload app_mor.so

1. Login to Asterisk CLI
2. Make sure there are no active calls using command: show channels, wait till they end or kill them using soft hangup command
3. Issue: module unload app_mor.so
4. Then: module load app_mor.so