SIP response 484 is translated to 404
From Kolmisoft Wiki
Jump to navigationJump to search
It can be fixed by changing "allowoverlap" field value to "yes" in mor.devices table.
Description of "allowoverlap":
allowoverlap = yes|no : Enable/disable overlap dialing support. Default yes (Overlap dial provides for a longer time-out period between digits, also called the inter-digit timer. With overlap dial set to off, the gateway expects to receive the digits one right after the other coming in to this line with very little delay between digits. With overlap dial set to on, then the device waits up to about 2 seconds between digits).
