M4 How to make first call
Configuration guide
This small guide will show how to make your first call after system installation.
TARIFFS
Create Tariffs/Rates for Customers and Suppliers.
TERMINATOR
Create a User which will be your Supplier (will sell traffic to you). Set min/max balance for this User (example 0, 10).
Create Device for Supplier and mark it as 'Act as Termination Point', mark it Active, set Tariff for it. Set '.*' (without quotes) in Source (CallerID) Allow field. The device should be IP Auth. Enter the proper IP for this Device (where to call will go)
ROUTING
Create Dial Peer (Routing -> Dial Peers).
Set '.*' (without quotes) for 'Destination regexp' and 'Source regexp' This will allow any CallerID to any Destination.
Assign Termination Point to the Dial Peer (Routing -> Dial Peers -> TP list icon)
Create a Routing Group (Routing -> Routing Groups). Assign Dial Peer to Routing Group. (icon Routing -> Routing Groups -> Dial Peers)
ORIGINATOR
Create a User which will be your Customer (will buy traffic from you). Set min/max balance for this User (example -10, 0).
Create a Device for the Customer and mark it as 'Act as Origination Point', mark it Active, set Routing Algorithm, Routing Group and Tariff for it. Set '.*' (without quotes) in Source (CallerID) Allow field. The device should be IP Auth. Enter the proper IP for this Device (from where the call will come)
Assign proper Routing Group and Tariff for the Origination Point.
Call
Configuration video
IMPORTANT
This is a basic tutorial just to make the first call. The configuration will allow any CallerID to dial any Destination from the set IP. Adjust settings accordingly to suit your needs.
