Difference between revisions of "LCR/Tariff change based on call prefix"

From Kolmisoft Wiki
Jump to navigationJump to search
m
 
(9 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Main purpose of this function is to allow route call through some Provider(s) based on call prefix.
Also called: Tech Prefix functionality.


The main purpose of this function is for calls to be routed through a provider or providers based on call prefix.


You have to create a provider, tarrif, LCR (where specified provider have to be), and user with his Device. And most important is localization rule or rules. It should be applied per device basis (Device settings -> Location), make sure specified device has correct rule applied. It must be noted that specified rules has Higher priority than global rules.  
You have to create a provider, tariff, LCR (where the specified provider has to be), and a user with his device. And most important, the localization rule or rules. It should be applied per device basis (Device settings -> Location), making sure the specified device has the correct rule applied. It must be noted that specified rules have higher priority than global rules.  


* 1) Create new tarrif, provider, LCR, user and device
* 1) Create a new tariff, provider, LCR, user and device.
* 2) Assign newly made provider to new LCR.
* 2) Assign the newly made provider to the new LCR.
* 3) Create new localization rule, name for example "test1".
* 3) Create a new localization rule, named for example "test1".
* 4) Assign device to location "test1"
* 4) Assign the device to location "test1".
* 5) Now edit "test1" rule, it should be done like with normal localization rules, but when you are creating localization rule based on tarrif or LCR, assign specified Tarrif or LCR to correct place.
* 5) Now edit the "test1" rule. It should be done last with normal localization rules, but when you are creating a localization rule based on tariff or LCR, assign the specified Tariff or LCR to correct place.


You can find more info how to make rules in [[Number Manipulation]]
You can find more info on how to make rules in [[Number Manipulation]].




=== Example ===
=== Example ===


Lets say we have Provider which provider 3 quality routes: bad-cheap/normal/good-expensive.
Lets say we have a provider that provides three quality routes: bad-cheap/normal/good-expensive.


* Bad-cheap route is selected when dialing E164 number with prefix 00
* The bad-cheap route is selected when dialing an E.164 number with prefix 00.
* Normal route is dialed when dialing normal E164 number
* The normal route is dialed when dialing the normal E.164 number.
* Good-expensive route is selected when dialing E164 number with prefix 000
* The good-expensive route is selected when dialing the E.164 number with the prefix 000.


To accomplish this we need:
To accomplish this, we need to:


* Create Provider
* Create three providers with the same connection settings:
* Create 3 Tariffs:
** Bad_Provider
** Tariff_Bad
** Normal_Provider
** Tariff_Normal
** Good_Provider
** Tariff_Good
 
* Enter/Import appropriate rates to these Tariffs
* Create three Tariffs for providers:
* Create Location with following Rules:
** Provider_Tariff_Bad
** Provider_Tariff_Normal
** Provider_Tariff_Good
* Enter/Import appropriate rates to these Tariffs.
* Assign these Tariffs to providers.
 
* Create three LCRs and assign appropriate providers:
** Bad_LCR - assign Bad_Provider here
** Normal_LCR - assign Normal_Provider here
** Good_LCR - assign Good_Provider here
 
* Create three Tariffs for users:
** User_Tariff_Bad
** User_Tariff_Normal
** User_Tariff_Good
* Enter/Import appropriate rates to these Tariffs.
 
* Create Location BadNormalGood with the following Rules:
 
[[Image:lcr_tariff_by_prefix_localization.png]]
 
* Assign User_Normal_Tariff and Normal_LCR to User.
* Assign all the user's devices to Location BadNormalGood.
 
That's it.
 
Now when the user dials E.164 numbers, he will be using the normal route; when 00, the bad route; and when 000, the good route.

Latest revision as of 04:18, 4 September 2013

Also called: Tech Prefix functionality.

The main purpose of this function is for calls to be routed through a provider or providers based on call prefix.

You have to create a provider, tariff, LCR (where the specified provider has to be), and a user with his device. And most important, the localization rule or rules. It should be applied per device basis (Device settings -> Location), making sure the specified device has the correct rule applied. It must be noted that specified rules have higher priority than global rules.

  • 1) Create a new tariff, provider, LCR, user and device.
  • 2) Assign the newly made provider to the new LCR.
  • 3) Create a new localization rule, named for example "test1".
  • 4) Assign the device to location "test1".
  • 5) Now edit the "test1" rule. It should be done last with normal localization rules, but when you are creating a localization rule based on tariff or LCR, assign the specified Tariff or LCR to correct place.

You can find more info on how to make rules in Number Manipulation.


Example

Lets say we have a provider that provides three quality routes: bad-cheap/normal/good-expensive.

  • The bad-cheap route is selected when dialing an E.164 number with prefix 00.
  • The normal route is dialed when dialing the normal E.164 number.
  • The good-expensive route is selected when dialing the E.164 number with the prefix 000.

To accomplish this, we need to:

  • Create three providers with the same connection settings:
    • Bad_Provider
    • Normal_Provider
    • Good_Provider
  • Create three Tariffs for providers:
    • Provider_Tariff_Bad
    • Provider_Tariff_Normal
    • Provider_Tariff_Good
  • Enter/Import appropriate rates to these Tariffs.
  • Assign these Tariffs to providers.
  • Create three LCRs and assign appropriate providers:
    • Bad_LCR - assign Bad_Provider here
    • Normal_LCR - assign Normal_Provider here
    • Good_LCR - assign Good_Provider here
  • Create three Tariffs for users:
    • User_Tariff_Bad
    • User_Tariff_Normal
    • User_Tariff_Good
  • Enter/Import appropriate rates to these Tariffs.
  • Create Location BadNormalGood with the following Rules:

Lcr tariff by prefix localization.png

  • Assign User_Normal_Tariff and Normal_LCR to User.
  • Assign all the user's devices to Location BadNormalGood.

That's it.

Now when the user dials E.164 numbers, he will be using the normal route; when 00, the bad route; and when 000, the good route.

Retrieved from "https://wiki.kolmisoft.com/index.php?title=LCR/Tariff_change_based_on_call_prefix&oldid=16690"