Difference between revisions of "Configuring DIDWW"

From Kolmisoft Wiki
Jump to navigationJump to search
Line 63: Line 63:




<center>'''<big><big><big>VERY IMPORTANT!!!<br> accountcode should be == Device ID in your Provider window. In our case it is == 5. Change it accordingly to your correct value!!!</big></big></big>'''</center>
<center>'''<big><big><big>========== VERY IMPORTANT!!! ==========<br> accountcode should be == Device ID in your Provider window. In our case it is == 5. Change it accordingly to your correct value!!!</big></big></big>'''</center>





Revision as of 21:54, 3 April 2008

Didww.gif

The problem with this DID Provider is that it send calls from many IP addresses:

  • 212.150.36.116
  • 212.150.88.20
  • 212.150.88.21
  • 204.11.194.34
  • 204.11.194.35
  • 204.11.194.36
  • 204.11.194.37
  • 204.11.194.38





First create new Provider (most important parts are marked in red, Device ID can/will be different in your case - REMEMBER IT!!!):

Didww1.png


Then in /etc/asterisk/sip.conf at the very end enter (copy/paste):

[didww_116]
type=friend
context=mor
accountcode=5
host=212.150.36.116
[didww_21]
type=friend
context=mor
accountcode=5
host=212.150.88.21
[didww_34]
type=friend
context=mor
accountcode=5
host=204.11.194.34
[didww_35]
type=friend
context=mor
accountcode=5
host=204.11.194.35
[didww_36]
type=friend
context=mor
accountcode=5
host=204.11.194.36
[didww_37]
type=friend
context=mor
accountcode=5
host=204.11.194.37
[didww_38]
type=friend
context=mor
accountcode=5
host=204.11.194.38


========== VERY IMPORTANT!!! ==========
accountcode should be == Device ID in your Provider window. In our case it is == 5. Change it accordingly to your correct value!!!


Then:

  • Save the file.
  • Reload Asterisk.
  • Create DID
  • Assign to DIDWW Provider
  • Assign to some device
  • Configure correct routing(mapping) in www.didww.com

and you should be fine.





If you are using IAX2 connection from DIDWW - create Provider with type = IAX2 and paste all this in /etc/asterisk/iax.conf