Allowed Addresses

From Kolmisoft Wiki
Revision as of 10:27, 30 September 2015 by Mindaugas (talk | contribs) (Created page with ''''IP, MASK''' – permits traffic from this IP only. You can find a detailed explanation [http://www.voip-info.org/wiki/index.php?page=Asterisk+sip+permit-deny-mask here]. You …')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

IP, MASK – permits traffic from this IP only. You can find a detailed explanation here.

You can enable multiple allowed addresses however this option should be turned on to be visible in main device settings window. Go to SETTINGS -> Setup -> Settings -> Various tab and choose Yes for Enable "Allowed addresses" option for Devices:.

Settings visual advanced.png

And click Save changes.

Now you will see an additional section in SIP and IAX2 Devices edit window:

Deviceconfig allowedaddr.png

Allowed addresses describes from what IP's or defined subnets accept traffic. NOTE that this setting take effect only for Dynamic authentication devices. For IP authentication devices, this setting is not applied.

If you do not clearly understand what these settings are used for, leave them with default values.