Hangupcause Codes
From Kolmisoft Wiki
Jump to navigationJump to search
MOR application saves hangupcause codes to DB so it is easy to check what was the error and why call failed.
These codes can be seen in calls window (Hangup Cause column) when selected to show 'All', 'Busy', 'No Answer', 'Failed' or 'Missed' calls.
- Standard hangup codes can be found here.
- ISDN Hangup cause codes
MOR specific codes:
| Code | Cause |
| 200 | MOR can't determine who is calling |
| 201 | User is blocked |
| 202 | Reseller is blocked |
| 203 | No rates for user |
| 204 | No suitable providers found |
| 205 | MOR PRO not authorized to work on this computer |
| 206 | server_id is not set in mor.conf file |
| 207 | Not clear who should receive call |
| 210 | Balance > 0, but not enough to make call 1s in length |
| 211 | Low balance for user |
| 212 | Too low balance for more simultaneous calls |
| 213 | Low balance for DID owner |
| 214 | Too low balance for DID owner for more simultaneous calls |
| 215 | Low balance for reseller |
| 216 | Too low balance for reseller for more simultaneous calls |
