MOR API device details get

Description

MOR API Device details get

Usage

• From MOR X5 call: /api/device_details_get
• Methods: POST, GET(if allowed, not recomended)

Parametres

• u – username for authentication. Required.
• device_id – id of the device which details you want to get.
• hash – SHA1 hash constructed using device_id and API_Secret_Key ( More described in Constructing hash). Required.

Please note that admin/reseller can retrieve Device details just for their own Users. Simple users cannot check device details.

Request

We have API Secret Key = 456789, device_id = 5

We send:

HTML POST: http://<SERVER_IP>/billing/api/device_details_get?u=admin&device_id=5&hash=65fd575c441513bd114b84c7dbdb01e0f2716d27

* Note that username is not included in hash

Returns

Success

<page>
    <name>101  </name>
    <host>dynamic  </host>
    <secret>vauvszef  </secret>
    <context>mor_local  </context>
    <ipaddr>0.0.0.0  </ipaddr>
    <port>0  </port>
    <regseconds>1175892667  </regseconds>
    <accountcode>2  </accountcode>
    <callerid>"101" <101>  </callerid>
    <extension>101  </extension>
    <voicemail_active>0  </voicemail_active>
    <username>101  </username>
    <device_type>IAX2  </device_type>
    <works_not_logged>1  </works_not_logged>
    <forward_to>0  </forward_to>
    <record>0  </record>
    <transfer>no  </transfer>
    <disallow>all  </disallow>
    <allow>all  </allow>
    <deny>0.0.0.0/0.0.0.0  </deny>
    <permit>0.0.0.0/0.0.0.0  </permit>
    <nat>yes  </nat>
    <qualify>500  </qualify>
    <fullcontact>  </fullcontact>
    <canreinvite>no  </canreinvite>
    <dtmfmode>rfc2833  </dtmfmode>
    <callgroup>  </callgroup>
    <pickupgroup>  </pickupgroup>
    <fromuser>  </fromuser>
    <fromdomain>  </fromdomain>

<trustrpid>no </trustrpid><sendrpid>no </sendrpid><insecure>no </insecure><progressinband>never </progressinband><videosupport>no </videosupport><description>Test Device #1 </description><istrunk>0 </istrunk><cid_from_dids>0 </cid_from_dids><pin> </pin><tell_balance>0 </tell_balance><tell_time>0 </tell_time><tell_rtime_when_left>60 </tell_rtime_when_left><repeat_rtime_every>60 </repeat_rtime_every><t38pt_udptl>no </t38pt_udptl><regserver> </regserver><ani>0 </ani><promiscredir>no </promiscredir><timeout>60 </timeout><process_sipchaninfo>0 </process_sipchaninfo><allow_duplicate_calls>0 </allow_duplicate_calls><call_limit>0 </call_limit><lastms>0 </lastms><faststart>yes </faststart><h245tunneling>yes </h245tunneling><latency>0.0 </latency><grace_time>0 </grace_time><recording_to_email>0 </recording_to_email><recording_keep>0 </recording_keep><recording_email>

 </recording_email><record_forced>0  </record_forced><fake_ring>0  </fake_ring><save_call_log>0  </save_call_log><mailbox>  </mailbox><enable_mwi>0  </enable_mwi><authuser>
 </authuser><requirecalltoken>no  </requirecalltoken><language>  </language><use_ani_for_cli>false  </use_ani_for_cli><calleridpres>  </calleridpres><change_failed_code_to>0  </change_failed_code_to><reg_status>  </reg_status><max_timeout>0  </max_timeout><anti_resale_auto_answer>0  </anti_resale_auto_answer><qf_tell_balance>0  </qf_tell_balance>

<qf_tell_time>0 </qf_tell_time> <time_limit_per_day>0 </time_limit_per_day> <control_callerid_by_cids> </control_callerid_by_cids> <callerid_advanced_control>0 </callerid_advanced_control> <transport>udp </transport> <subscribemwi> </subscribemwi> <encryption>no </encryption> <block_callerid>0 </block_callerid> <tell_rate>0 </tell_rate> <trunk>no </trunk> <proxy_port>0 </proxy_port> <cps_call_limit>0 </cps_call_limit> <cps_period>0 </cps_period> <timerb>6400 </timerb> <op>0 </op> <op_active>0 </op_active> <op_tech_prefix> </op_tech_prefix> <op_routing_algorithm>lcr </op_routing_algorithm> <op_capacity>500 </op_capacity> <op_src_regexp> </op_src_regexp> <op_src_deny_regexp> </op_src_deny_regexp> <tp>0 </tp> <tp_active>0 </tp_active> <tp_tech_prefix> </tp_tech_prefix> <tp_capacity>500 </tp_capacity> <tp_src_regexp> </tp_src_regexp> <tp_src_deny_regexp> </tp_src_deny_regexp> <defaultuser>101 </defaultuser> <useragent> </useragent> <type>friend </type> <md5secret> </md5secret> <remotesecret> </remotesecret> <directmedia> </directmedia> <useclientcode>

 </useclientcode><setvar>
 </setvar><amaflags>
 </amaflags><callcounter>
 </callcounter><busylevel>
 </busylevel><allowoverlap>
 </allowoverlap><allowsubscribe>
 </allowsubscribe><maxcallbitrate>
 </maxcallbitrate><rfc2833compensate>
 </rfc2833compensate><session-timers>
 </session-timers><session-expires>
 </session-expires><session-minse>
 </session-minse><session-refresher>
 </session-refresher><t38pt_usertpsource>
 </t38pt_usertpsource><regexten>
 </regexten><defaultip>
 </defaultip><rtptimeout>
 </rtptimeout><rtpholdtimeout>
 </rtpholdtimeout><outboundproxy>
 </outboundproxy><callbackextension>
 </callbackextension><timert1>
 </timert1><qualifyfreq>
 </qualifyfreq><constantssrc>
 </constantssrc><contactpermit>
 </contactpermit><contactdeny>
 </contactdeny><usereqphone>
 </usereqphone><textsupport>
 </textsupport><faxdetect>
 </faxdetect><buggymwi>
 </buggymwi><auth>md5  </auth><fullname>
 </fullname><trunkname>
 </trunkname><cid_number>
 </cid_number><callingpres>
 </callingpres><mohinterpret>
 </mohinterpret><mohsuggest>
 </mohsuggest><parkinglot>
 </parkinglot><hasvoicemail>
 </hasvoicemail><vmexten>
 </vmexten><autoframing>
 </autoframing><rtpkeepalive>
 </rtpkeepalive><call-limit>
 </call-limit><g726nonstandard>
 </g726nonstandard><ignoresdpversion>
 </ignoresdpversion><allowtransfer>
 </allowtransfer><dynamic>
 </dynamic>
 <codecs>
  <audio_codecs>    </audio_codecs>
  <video_codecs>    </video_codecs>
 </codecs>
</page>

---

Errors

• <error>User not found</error> – User was not found.
• <error>user_id is empty</error> – user_id was not sent.
• <error>Bad login</error> – User was not found by username and password. Use correct username and password. Make sure that username (u) and password (p) are specified.
• <error>Incorrect hash</error> – Hash was not correct. Check API_Secret_Key and order or params while concatenating hash_string.

See also

• MOR API