Sangoma Wanpipe installation
From Kolmisoft Wiki
Jump to navigationJump to search
http://wiki.sangoma.com/wanpipe-linux-asterisk-install
Installation
After Zaptel with Asterisk/Libpri are installed:
apt-get install gcc-c++ flex ncurses patch cd /usr/src wget ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.2.1.tgz tar xzvf wanpipe-3.2.1.tgz cd wanpipe-3.2.1 ./Setup install
Configuration
Would you like to install WANPIPE now? [y] (y/n) YES
ENTER
Would you like build wanpipe kernel drivers? [y] (y/n) YES
Press Enter for Default: /lib/modules/2.6.18-5-686/build ENTER
WANPIPE device drivers upgraded successfully! ENTER
Proceed to build WANPIPE kernel modules ? [y] (y/n) YES
Please select (1,2,3,4,5,6 or 7) [Default: 1]: 2
Looking for zaptel directory in /usr/src ... ------------------------------------------- 1 : /usr/src/zaptel-1.4.7.1 2 : /usr/src/zaptel ------------------------------------------ 3 : /usr/src/zaptel (entered manually) ------------------------------------------ m : Enter zaptel path manually
(ctrl-c to Exit) Please select working zaptel directory [1-9][m]: 1 Enable TDMV DCHAN Native HDLC Support & Patch Zaptel (recommended) ? (y/n) YES
Recompile/reinstall Zaptel (recommended) ? (y/n) YES
ENTER ENTER ENTER ENTER Visually Confirm that driver compilation was successful! (y/n) YES
Would you like to install WANPIPE start-up scripts? (y/n) YES
Would you like to auto-execute ztcfg after wanrouter start? (y/n) YES
ENTER ENTER ENTER ENTER ENTER ENTER ENTER ENTER Would you like to configure wanpipe devices for ZAPTEL? (y/n) YES Would you like to generate /etc/asterisk/zapata.conf 1
Following configuration depends on your own case!
Select media type for A101 on port 1 [slot:2 bus:2 span:1] Select framing type for 101 on port 1 Select clock for A101 on port 1 [slot:2 bus:2 span:1] Select signalling type for 101 on port 1 [slot:2 bus:2 span:1] Select switchtype for 101 on port 1
Zaptel and Wanpipe configuration complete: choose action 1. Save cfg: Restart Asterisk & Wanpipe now
Would you like to execute 'ztcfg' each time wanrouter starts? 1. YES
Testing
Confirm successful Wanpipe/Zaptel installation run:
wanrouter hwprobe
Errors
Warning: WAN_LOCK_DIR = /var/lock/subsys does not exist! Please update the WAN_LOCK_DIR in /etc/wanpipe/wanrouter.rc
In file /etc/wanpipe/wanrouter.rc fix real path.