PBX connection to MOR

Any IP/PSTN capable PBX can be connected to MOR:

To simplify diagram - we can show the common way how any PBX can be connected to MOR:

Here main principles will be explained. For detailed manual please see Trixbox section.

In this diagram we see that we have 1 PBX connected to MOR Billing system. 2 phones (Phone 1 and Phone 2) are connected to PBX. Now both phones can dial out to the PSTN through PBX and MOR.

Dialing from PBX

Our task is to bill each Phone separately.

• In MOR we need to create 1 User/Device for PBX
• We need to create Device for this PBX to describe how it is connected to MOR
• You should mark this device as Trunk with ANI

To bill our devices separately we need:

• To create for 1 virtual device for each real device connected to PBX
• In device's CLI menu we need to add CallerID's of these devices as described in PBX - using CallerID of device MOR recognizes who is calling and assigns call to correct device