Fax is not received
After trying to use Fax2Email functionality in Asterisk CLI you see:
- Check permissions on /var/spool/asterisk/faxes
- Make sure UDTP range 4000-4999 is open on the firewall.
mor_fax2email: MOR Fax2Email v0.1.3 AGI script started. mor_fax2email: Failed to connect database server. Check debug for more info. mor_fax2email: ERROR! Not connected to database.
Solution:
In /var/lib/asterisk/agi-bin/mor.conf correct DB connection settings.
__ast_pbx_run: Channel 'Local/999@mor_local-1217,2' sent into invalid extension 'fax' in context 'mor_fax2email', but no invalid handler
Make sure /etc/asterisk/extensions_mor.conf has such line:
[mor_fax2email]
exten => _X.,1,Answer
exten => _X.,2,StopPlaytones
exten => _X.,3,Playback(beep)
exten => _X.,4,Set(FAXFILE=${CDR(UNIQUEID)})
exten => _X.,5,RxFax(/var/spool/asterisk/faxes/${FAXFILE}.tif)
exten => fax,1,Goto(mor_fax2email,111,1)
exten => h,1,DeadAGI(mor_fax2email) exten => h,2,Hangup
If not - add such line (marked in bold) and reload Asterisk.
ERROR! TIF file does not exist!
If you get a similar output in Asterisk CLI:
mor_fax2email:
mor_fax2email: MOR Fax2Email AGI script started.
mor_fax2email: Successfully connected to database.
mor_fax2email: from sender: , fax file: 1311285609.5, faxsender: 311043455xx, fax_id :14, pdf file: /var/spool/asterisk/faxes/1311285609.5.pdf, tif file: /var/spool/asterisk/faxes/1311285609.5.tif
[2011-07-22 00:01:52] NOTICE[3316]: app_mor_debug.c:168 process_call_details: RTPAUDIOQOS: ssrc=655552979;themssrc=428650528;lp=0;rxjitter=0.006493;rxcount=4511;txjitter=0.002304;txcount=541;rlp=0;rtt=0.020000
[2011-07-22 00:01:52] NOTICE[3316]: app_mor_debug.c:186 process_call_details: PDD:
[2011-07-22 00:01:52] NOTICE[3316]: app_mor.c:2407 mor_acct_stop: Reseller's balance will be deducted by: 0.000000, and frozen balance by: 0.000000.
mor_fax2email: ERROR! TIF file does not exist!
-- AGI Script mor_fax2email completed, returning 0
-- Executing [h@mor_fax2email:2] Hangup("Local/910007@mor_local-1f39,2", "") in new stack
== Spawn extension (mor_fax2email, h, 2) exited non-zero on 'Local/91000x@mor_local-1f39,2'
the problem can be anywhere if you get this error. Please see this page: FAX over VoIP
Make sure T38 was not enabled
If you face a problem with FAX not being received, two ways to detect this problem:
- Fax call takes about 30 seconds, and faxes not trains (if the codec is G729, call takes a little bit more than 40seconds and fails)
- Make a SIP debug, and you will see like this:
v=0. o=CiscoSystemsSIP-GW-UserAgent 7568 7687 IN IP4 195.62.x.x. s=SIP Call. c=IN IP4 ip.add.re.ss. t=0 0. m=image 52972 udptl t38. c=IN IP4 ip.add.re.ss. a=T38FaxVersion:0. a=T38MaxBitRate:14400. a=T38FaxFillBitRemoval:0. a=T38FaxTranscodingMMR:0. a=T38FaxTranscodingJBIG:0. a=T38FaxRateManagement:transferredTCF. a=T38FaxMaxBuffer:200. a=T38FaxMaxDatagram:72. a=T38FaxUdpEC:t38UDPRedundancy.
Solution, check in sip.conf:
t38pt_udptl = no (be sure, it's NOT yes)
FAX is not received on ZAP channel
When ZAP channel is used, FAX device should be assigned to Asterisk server which has ZAP/DAHDI cards installed. Please make sure that correct Asterisk server is specified in "Server" drop-down list on FAX device settings.
It can be an issue when you have more than one Asterisk server only.
Timing module is not loaded
If Timing module is not working or if not loaded at all, FAX will fail and you will see ERROR like:
ERROR[14592]: res_fax_spandsp.c:464 spandsp_fax_new: Channel 'Local/1054@mor_local-00012b63;2' FAX session '253' failed to create timing source. ERROR[14592]: res_fax.c:893 fax_session_new: FAX session failed to initialize. ERROR[14592]: res_fax.c:1183 generic_fax_exec: Can't create a FAX session, FAX attempt failed.
- Check Timing module first:
sip*CLI> timing test 50 Attempting to test a timer with 50 ticks per second. Failed to open timing fd Command 'timing test 50' failed. sip*CLI>
If you see that Timing failed like in an example above, than it seems your Timing module is not working or is missing at all. To check Timing module do like this in Asterisk CLI:
asterisk1*CLI> module show like res_timing_dahdi.so Module Description Use Count 0 modules loaded
This means that you have no Timing modules loaded at all. To load Timing module, check if there are any possible Timing modules:
[root@VM ]$ cd /usr/lib/asterisk/modules/ [root@VM ]$ ll | grep res_timing -rwxr-xr-x 1 root root 179896 Oct 2 2014 res_timing_pthread.so -rwxr-xr-x 1 root root 165310 Oct 2 2014 res_timing_timerfd.so [root@VM ]$
In example there are two Timing modules available/compiled. We timerfd module:
VM*CLI> module load res_timing_timerfd.so Loaded res_timing_timerfd.so Loaded res_timing_timerfd.so => (timerfd Timing Interface) VM*CLI>
If only pthread module is available, then we do:
VM*CLI> module load res_timing_pthread.so Loaded res_timing_pthread.so Loaded res_timing_pthread.so => (pthread Timing Interface) VM*CLI>
After module is loaded, Timing should work already. To check it, Timing test should show something like:
VM*CLI> timing test 50 Attempting to test a timer with 50 ticks per second. Using the 'timerfd' timing module for this test. It has been 1000 milliseconds, and we got 50 timer ticks VM*CLI>
The error should be now resolved and not happen again.
