Testing MOR PRO installation
Initial tests
Run /usr/src/mor/test.sh to test
- MySQL and Asterisk connectivity
- Fax2Email modules
- H323 module
- #mime-construct
- If g723 and g729 codecs are installed
- Connected users
- Autodialer
- Part of GUI
That can be done manually also.
Login to the system
Go to the GUI: http://<my-ip-address>/billing
And login as: admin/admin
If you can't connect or unable to access, try rebooting your system.
Configuration file
Go to /home/mor/config/environment.rb
- Web_URL - enter correct URL where MOR GUI can be reached, e.g. http://23.45.67.89/billing
- Do not leave 0.0.0.0 - it's bad value, enter real IP by which you access GUI
- Recordings_Folder - enter correct URL where recordings can be reached (they can be on different server, e.g. http://98.65.43.21/billing/recordings)
- Addons - enable addons if you purchased them. Note - enabling them when they are not installed will mess your GUI
Restart Apache:
If you have Debian:
/etc/init.d/apache2 restart
Or Centos/Fedora:
/etc/init.d/httpd restart
GUI
Go to and make sure page is displayed correctly:
- SETTINGS - Users - Devices - create new device/delete device
Register new user over GUI (registration from login page), enter your email and check after registration if you received it
Activation test
Configure softphone with following settings: 101/101 and call any number, let's say 123456789. On the CLI normal call process should be visible. If MOR tells, that "MOR is not authorized to work on this computer" - that means there are problems with serial.
Or in Asterisk CLI write:
module unload app_mor.so module load app_mor.so
It should say somethign similar:
[Dec 10 08:49:27] NOTICE[19319]: app_mor.c:4050 load_module: MOR PRO is authorized to work on this computer. Loaded app_mor.so => (MOR Billing Solution v0.5.0.6)
This means everything is ok.
Fax2Email
Go to device's 102 settings (http://YOUR_IP/billing/devices/pdffaxemail_edit/1) and change fax email to yours.
Register your softphone with settings 101/101 (if you can't make sure you opened necessary ports).
Using your softphone dial *9901 - you should get email with test fax attached as PDF.
Go to:
- STATISTICS-VARIOUS-FAXES (http://YOUR_IP/billing/stats/faxes_list/2) - press on PDF - should open your received fax
VoiceMail
Dial *97, you should hear: Comedian Mail Mailbooox... or You haaaave no messages...
WEB Callback
Login as user 101: (101/101)
Go to PERSONAL MENU - Various - Callback and enter any numbers, press Execute. On Asterisk CLI you should see:
-- Attempting call on Local/21233@mor_cb_src/n for 23234@mor_cb_dst:1 (Retry 1)
-- Executing [21233@mor_cb_src:1] NoOp("Local/21233@mor_cb_src-18d8,2", "MOR CB calls src!") in new stack
....
Possible errors:
Errno::EACCES (Permission denied - /tmp/mor_cf_xxxx or /var/spool/asterisk/outgoing/mor_cf_xxxx)
A Errno::EXDEV occurred in functions#activate_callback:
No action on Asterisk CLI - enter correct AMI settings in MOR GUI Settings - AMI Interface
Crontab for Auto-Dialer
Skip this section if you do not have Auto-Dialer addon.
Check /home/mor_ad/mor_ad_cron.log, you should see something like this:
2007-12-07 00:01:53 - Start of MOR Auto-Dialer Cron script. DB config. Host: localhost, DB name: mor, user: mor, psw: mor, port: 3306. Successfully connected to database. No campaigns found active this time: 00:01:53 Total campaigns retrieved: 0
For multi-server systems
Configure AMI connections
On Asterisk servers configure /etc/asterisk/manager.conf to allow GUI server to connect to Asterisk servers over AMI
[mor] secret = morsecret deny=0.0.0.0/0.0.0.0 permit=127.0.0.1/255.255.255.0 permit=10.70.10.10/255.255.255.0 read = system,call,log,verbose,command,agent,user,config write = system,call,log,verbose,command,agent,user,config
NOTE: 10.70.10.10 is EXAMPLE IP - put correct one in your system.
Enter Asterisk servers into GUI interface
Enter correct settings to allow GUI to manage Asterisk servers over AMI
