MOR API device details get
Description
MOR API Device details get
Usage
- From MOR X5 call: /api/device_details_get
- Methods: POST, GET(if allowed, not recomended)
Parametres
- u – username for authentication. Required.
- device_id – id of the device which details you want to get.
- hash – SHA1 hash constructed using device_id and API_Secret_Key ( More described in Constructing hash). Required.
Please note that admin/reseller can retrieve Device details just for their own Users. Simple users cannot check device details.
Request
We have API Secret Key = 456789, device_id = 5
We send:
HTML POST: http://<SERVER_IP>/billing/api/device_details_get?u=admin&device_id=5&hash=65fd575c441513bd114b84c7dbdb01e0f2716d27
* Note that username is not included in hash
Returns
Success
<page> <name>101 </name> <host>dynamic </host> <secret>vauvszef </secret> <context>mor_local </context> <ipaddr>0.0.0.0 </ipaddr> <port>0 </port> <regseconds>1175892667 </regseconds> <accountcode>2 </accountcode>
<callerid> "101" <101> </callerid><extension> 101 </extension><voicemail_active> 0 </voicemail_active><username> 101 </username><device_type> IAX2 </device_type><works_not_logged> 1 </works_not_logged><forward_to> 0 </forward_to><record> 0 </record><transfer> no </transfer><disallow> all </disallow><allow> all </allow><deny> 0.0.0.0/0.0.0.0 </deny><permit> 0.0.0.0/0.0.0.0 </permit><nat> yes </nat><qualify> 500 </qualify><fullcontact>
</fullcontact><canreinvite>
no </canreinvite><dtmfmode> rfc2833 </dtmfmode><callgroup>
</callgroup><pickupgroup> </pickupgroup><fromuser> </fromuser><fromdomain> </fromdomain><trustrpid>
no </trustrpid><sendrpid> no </sendrpid><insecure> no </insecure><progressinband> never </progressinband><videosupport> no </videosupport><description> Test Device #1 </description><istrunk> 0 </istrunk><cid_from_dids> 0 </cid_from_dids><pin>
</pin><tell_balance>
0 </tell_balance><tell_time> 0 </tell_time><tell_rtime_when_left> 60 </tell_rtime_when_left><repeat_rtime_every> 60 </repeat_rtime_every><t38pt_udptl> no </t38pt_udptl><regserver>
</regserver><ani>
0 </ani><promiscredir> no </promiscredir><timeout> 60 </timeout><process_sipchaninfo> 0 </process_sipchaninfo><allow_duplicate_calls> 0 </allow_duplicate_calls><call_limit> 0 </call_limit><lastms> 0 </lastms><faststart> yes </faststart><h245tunneling> yes </h245tunneling><latency> 0.0 </latency><grace_time> 0 </grace_time><recording_to_email> 0 </recording_to_email><recording_keep> 0 </recording_keep><recording_email>
</recording_email><record_forced>
0 </record_forced><fake_ring> 0 </fake_ring><save_call_log> 0 </save_call_log><mailbox>
</mailbox><enable_mwi>
0 </enable_mwi><authuser>
</authuser><requirecalltoken>
no </requirecalltoken><language>
</language><use_ani_for_cli>
false </use_ani_for_cli><calleridpres>
</calleridpres><change_failed_code_to>
0 </change_failed_code_to><reg_status>
</reg_status><max_timeout>
0 </max_timeout><anti_resale_auto_answer> 0 </anti_resale_auto_answer><qf_tell_balance> 0 </qf_tell_balance><qf_tell_time> 0 </qf_tell_time><time_limit_per_day> 0 </time_limit_per_day><control_callerid_by_cids>
</control_callerid_by_cids><callerid_advanced_control>
0 </callerid_advanced_control><transport> udp </transport><subscribemwi>
</subscribemwi><encryption>
no </encryption><block_callerid> 0 </block_callerid><tell_rate> 0 </tell_rate><trunk> no </trunk><proxy_port> 0 </proxy_port><cps_call_limit> 0 </cps_call_limit><cps_period> 0 </cps_period><timerb> 6400 </timerb><op> 0 </op><op_active> 0 </op_active><op_tech_prefix>
</op_tech_prefix><op_routing_algorithm>
lcr </op_routing_algorithm><op_capacity> 500 </op_capacity><op_src_regexp>
</op_src_regexp><op_src_deny_regexp> </op_src_deny_regexp><tp>
0 </tp><tp_active> 0 </tp_active><tp_tech_prefix>
</tp_tech_prefix><tp_capacity>
500 </tp_capacity><tp_src_regexp>
</tp_src_regexp><tp_src_deny_regexp> </tp_src_deny_regexp><defaultuser>
101 </defaultuser><useragent>
</useragent><type>
friend </type><md5secret>
</md5secret><remotesecret> </remotesecret><directmedia> </directmedia><useclientcode> </useclientcode><setvar> </setvar><amaflags> </amaflags><callcounter> </callcounter><busylevel> </busylevel><allowoverlap> </allowoverlap><allowsubscribe> </allowsubscribe><maxcallbitrate> </maxcallbitrate><rfc2833compensate> </rfc2833compensate><session-timers> </session-timers><session-expires> </session-expires><session-minse> </session-minse><session-refresher> </session-refresher><t38pt_usertpsource> </t38pt_usertpsource><regexten> </regexten><defaultip> </defaultip><rtptimeout> </rtptimeout><rtpholdtimeout> </rtpholdtimeout><outboundproxy> </outboundproxy><callbackextension> </callbackextension><timert1> </timert1><qualifyfreq> </qualifyfreq><constantssrc> </constantssrc><contactpermit> </contactpermit><contactdeny> </contactdeny><usereqphone> </usereqphone><textsupport> </textsupport><faxdetect> </faxdetect><buggymwi> </buggymwi><auth>
md5 </auth><fullname>
</fullname><trunkname> </trunkname><cid_number> </cid_number><callingpres> </callingpres><mohinterpret> </mohinterpret><mohsuggest> </mohsuggest><parkinglot> </parkinglot><hasvoicemail> </hasvoicemail><vmexten> </vmexten><autoframing> </autoframing><rtpkeepalive> </rtpkeepalive><call-limit> </call-limit><g726nonstandard> </g726nonstandard><ignoresdpversion> </ignoresdpversion><allowtransfer> </allowtransfer><dynamic> </dynamic><codecs><audio_codecs> </audio_codecs><video_codecs> </video_codecs></codecs></page>
Errors
- <error>User not found</error> – User was not found.
- <error>user_id is empty</error> – user_id was not sent.
- <error>Bad login</error> – User was not found by username and password. Use correct username and password. Make sure that username (u) and password (p) are specified.
- <error>Incorrect hash</error> – Hash was not correct. Check API_Secret_Key and order or params while concatenating hash_string.
