Softswitch performance

From Kolmisoft Wiki
Revision as of 07:50, 10 May 2008 by Mindaugas (talk | contribs)
Jump to navigationJump to search

It is important to note that simultaneous calls depends only on hardware you are using.

2008.03.01 1575 simultaneous calls (2049 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • ~15% calls with transcoding (~85% calls no transcoding)
  • CPU busy 83% (17% idle)
  • Comments:
    • why channels/2 != calls?
    • because not all of them was connected
    • and when the system is loaded the channels stats update slow
    • in that day we got to almost 3500 cc
    • when you have a lot of invites, the system get very slow
    • we got to 220 setup calls per second
    • and the system was very havy
    • in that load, your app was very good, however mysql become the bottlenack
    • so i had to tweak it a little bit, but we already talked about it.
    • with your app, from the time we installed, we already did more then 30M minutes.
    • this setup can handle around 4k cc easly with no high rate cs per second

Asterisk1575.png



2008.02.18 906 simultaneous calls (1801 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • ~15% calls with transcoding (~85% calls no transcoding)
  • CPU busy 58% (42% idle)

Asterisk906.jpg Top906.jpg



2008.05.10 834 simultaneous calls

834calls.png




2008.01.17 637 simultaneous calls (1274 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • no transcoding
  • CPU busy 10% (90% idle)



2008.01.17 608 simultaneous calls (1215 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • CPU busy 6.7% (93.3% idle) no transcoding
  • CPU 30-35% with transcoding

608calls.png



  • canreinvite=yes means that voice traffic goes from client to provider directly bypassing MOR system
Retrieved from "https://wiki.kolmisoft.com/index.php?title=Softswitch_performance&oldid=1375"