MOR PRO v0.6 documentation
This section describes features already implemented into development version of MOR PRO v0.6. When MOR PRO v0.6 will be released all this info will go to the manual.
Allow loss calls
Allow loss calls - this setting let's you decide - do you want to allow user to use some provider if provider's rate to some destination is lower then user's rate. Allowing such call you will pay more to provider then user pays you for such call - that means you will take loss on such call. If this setting is no (default) - cheaper providers will not be used in dialing.
CID control by DIDs
This setting let's you control what CID user can enter in his devices. These CID numbers should be from the set of device's DIDs. It is mainly used when user's PBX is connected over trunk and many DIDs are routed to this Trunk. Calls coming out from this PBX must have CallerID Number from the set of DIDs assigned to this Trunk (PBX). If CID from DIDs is checked - system checks if device's cid number is from dids assigned to this device. If no dids are assigned - this value is ignored. In order for this setting to be active - CID Name/Number fields must be empty to allow user enter any CID number he wants. If CID from DIDs is checked and user enters any CID (not from his DIDs) - system will change his CID by his first available DID (selected from database by lowest id).
Tariff analysis
Using this tool you can select the tariffs (wholesale) which you want to compare. Click on desired tariffs and select currency in which you want to compare tariffs. When you selected tariffs press on Generate CSV icon to get CSV file. In this file you can see all selected tariffs with their rates for ALL destinations. In 4 last columns you will find MIN and MAX rates for each destination with their providers. This let's you compare tariffs on the fly. The final section shows Total/Min/Max rates for each tariff. Using these values let's you see which tariff is the most expensive/cheap. NOTE: Min + Max can be not equal to Total because same provider can have MIN and MAX rates for some prefix if there're no more providers for this prefix (destination).
API
API waits for HTML POST to get request data. Then it returns result in XML.
MOR API <- more details
Addons
New addons introduced in MOR PRO v0.6
MOR Addons <- more details
Invoice by CallerID
This type of invoice groups all calls by CallerID.
It looks like this:
Client number: 37052058393
Number Date Duration Rate Price Destination
37063042439 2007-12-01 16:21:03 00:00:20 0.7597 0.2532 Lithuania
...
37068723423 2007-12-14 12:50:17 00:00:22 0.7597 0.2785 Lithuania
Lithuania 150.4886 LTL (Without VAT)
Total: 150.4886 LTL (Without VAT)
Client number: 37063042438
Number Date Duration Rate Price Destination
37068723423 2007-12-01 14:45:14 00:03:20 0.7597 2.5322 Lithuania
...
37065017476 2007-12-13 21:31:14 00:04:11 0.7597 3.1779 Lithuania
Lithuania 26.9805 LTL (Without VAT)
Total: 26.9805 LTL (Without VAT)
Monthly fee - test memo2 10.0000 LTL (Without VAT)
TOTAL TO PAY: 187.4692 LTL
Hide users
As it is not allowed to delete users who have at least 1 call - after some time such 'non-active' users accumulate and we need to do something to them to have clear control panel.
For that reason we just Hide them. They remain active - nothing changes for them - except we do not see them in the GUI.
Later you can find them in SETTINGS - Users - Hidden. You can unhide them if you wish anytime.
To hide a user go to his details and select Hidden. To unhide - Not hidden.
Hangupcause codes
MOR application saves hangupcause codes to DB so it is easy to check what was the error and why call failed.
These codes can be seen in calls window (Hangup Cause column) when selected to show 'All', 'Busy', 'No Answer', 'Failed' or 'Missed' calls.
Standard hangup codes can be found here.
MOR specific codes:
| Code | Cause |
| 200 | MOR can't determine who is calling |
| 201 | User is blocked |
| 202 | Reseller is blocked |
| 203 | No rates for user |
| 204 | No suitable providers found |
| 205 | MOR PRO not authorized to work on this computer |
| 206 | server_id is not set in mor.conf file |
| 210 | Balance > 0, but not enough to make call 1s in length |
| 211 | Low balance for user |
| 212 | Too low balance for more simultaneous calls |
| 213 | Low balance for DID owner |
| 214 | Too low balance for DID owner for more simultaneous calls |
| 215 | Low balance for reseller |
| 216 | Too low balance for reseller for more simultaneous calls |
