Linksys SPA942 Configuration

First we need to know what is the IP of the phone.

On phone press Menu button:

Then press 9 and you should see:

2 Current IP
23.45.67.89 

This is just example IP! Yours will be different! Remember it or write it down.

---

Then open your internet browser on computer which is connected in same network as your SPA942 and in address line type:

http://23.45.67.89

ATTENTION! Change 23.45.67.89 to your IP you find earlier!

SPA942 Configuration should open.

---

Press on Admin Login and then on Advanced:

---

Press on SIP and find section RTP Parameters and change RTP Packet Size value to 0.020:

---

Press on Regional and find section Miscellaneous and change Time Zone to appropriate one:

---

OPTIONAL: If you experience low audio or your callee can't hear you good enough, press on Phone and in section Audio Input Gain(dB) change fields values to 6:

---

Press on Ext 1 and:

• In section General make sure field Line Enable is Yes.
• NAT Settings, field NAT Keep Alive Enable - Yes
• Proxy and Registration
  • Proxy - value which your provider gave to you (some IP)
  • Register - Yes
• Subscriber Information
  • Display Name - value which you got from your provider (username or login)
  • User ID - value which you got from your provider (username or login) - same as in Display Name
  • Password - value which you got from your provider (password or secret)

---

And finally press on Submit All Changes

---