Call hangs after 30 seconds

From Kolmisoft Wiki
Revision as of 08:38, 13 August 2009 by Mindaugas (talk | contribs)
Jump to navigationJump to search
  • Check timeout - maybe call can't last more then 30s?
  • Make sure call is made over SIP protocol
  • Write down all IPs of all devices which participate in the session
  • Enable sip debug (only for parties in the call, not global sip debug)





  • Look for BYE packet, who is sending it.
  • If there is no BYE packet - big chance that problem is in the network - e.g. BYE packet does not reach our end or other end has problems with SIP protocol implementation
    • Check IP in SIP debug and compare to real IPs
    • If it is possible - try to capture SIP debug at the other end and compare to SIP debug in MOR






Such lines: 

[Aug  6 11:50:43] NOTICE[22403]: chan_sip.c:2927 auto_congest: Auto-congesting SIP/prov253-0a1966d0
-- SIP/prov253-0a1966d0 is circuit-busy 
Scheduling destruction of SIP dialog '0ceffd014862f2c043209aa56d4930f4@82.194.82.123' in 32000 ms (Method: INVITE)

Clearly points that there is no response from dialed server, so timeout occurred.

Possible solutions:

  • Check IP/port settings in configuration
  • Check network settings (bad routing/bad settings/etc)
  • Change device at the other end




See also:

Retrieved from "https://wiki.kolmisoft.com/index.php?title=Call_hangs_after_30_seconds&oldid=4401"