PBX Menus and IVRs

From Kolmisoft Wiki
Revision as of 21:51, 11 December 2017 by Valerij (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

Building menus and IVRs isn't much more complicated then building a basic callflow but there are a few gotchas you should know. We'll go through building a basic main menu that might answer your company's main line during the day and direct callers to extensions or departments.

1.Press button app

App.jpg

2.Choose CallFlows App

Callflow1.jpg

3.Press button Callflows

Callflow2.jpg

4.Click Add Callflow at the top left

Callflow3.jpg

5.Click in the area labeled "Click to add number"

6.In the pop-up, you can configure either an extension number or a phone number that is on your account. For extension numbers you can make up any number of any length as long as it is not already in use.

Callflow4.jpg

7.Drag the Menu element from Actions box, on the right, to the Callflow.

Callflow8.jpg

8.Click on Add a new menu.

Callflow9.jpg

9.Fill out the basic fields for the Name, Prompt Record PIN, Check the Allow caller to dial extensions box if you choose to, leave the Greeting Message as Not Set.

Callflow10.jpg

10.Click the Save button.

Callflow11.png

11.In the Actions box, on the right, click on Advanced.

Callflow12.png

12.Drag the Callflow element over the Menu you just created.

Callflow13.png

13.Choose the Menu option from the drop down box.

Callflow14.png

     Please note, for example, if you choose 1 as your Menu option, callers will be prompted to press 1 to be connected to the specified callflow.
     Also to clarify, 'Default Action' is when a caller does not choose a Menu option or chooses an incorrect Menu option.
     If this occurs, the caller will then be connected to this specified callflow.

14.Click OK.

15.Choose a callflow from the drop down box that you would like callers to be connected to.

Callflow15.png

 If you have not created a callflow, please see our Wiki page Call Flow.

16.Click OK.

Callflow16.png

17.Repeat steps 15 and 16 until your Menu options are complete.

Callflow17.png

18.Be sure you have not forgotten an option for callers to leave a voicemail!

19.In the Actions box, on the right, click on Basic and drag the voicemail element over the Menu you created.

Callflow18.png

20.Choose the Menu option from the drop down box.

Callflow19.png

21.Click OK.

22.Click on the green Save changes button on the top right.

Callflow20.png

23.Your Menu is now complete! Just one more step, record your personal menu greeting.

24.Dial the number you designated to the Menu and record your personal menu greeting.

Callflow21.png Callflow22.png

 Please note that you will be asked for the Prompt Record PIN that you created in step 9.
 Don't worry if you have forgotten it, simply click on the Menu element you have created and click on Edit menu options.