Difference between revisions of "TELES configuration"
From Kolmisoft Wiki
Jump to navigationJump to search
| Line 4: | Line 4: | ||
It reports that sends calls from port 5060 but actually sends calls from different port. In our case it was 1831: | It reports that sends calls from port 5060 but actually sends calls from different port. In our case it was 1831: | ||
<--- SIP read from '''181.29.146.70:1831''' ---> | <--- SIP read from '''181.29.146.70:1831''' ---> | ||
| Line 17: | Line 14: | ||
CSeq: 42891 ACK | CSeq: 42891 ACK | ||
Max-Forwards: 70 | Max-Forwards: 70 | ||
Asterisk sees it as from 5060: | |||
============== SIPCHANINFO =============== | |||
Peer IP: 181.29.146.70 | |||
Source IP: 181.29.146.70 | |||
From: sip:390331603040@181.29.146.70 | |||
Contact: sip:181.29.146.70:5060 | |||
Useragent: TELES.iSWITCH | |||
Peername: 181.29.146.70 | |||
T38Passthrough: 0 | |||
========================================== | |||
To accept calls from such device, you need to set correct port for it in MOR. | To accept calls from such device, you need to set correct port for it in MOR. | ||
Revision as of 16:15, 23 December 2008
TELES has some weirdness with SIP.
It reports that sends calls from port 5060 but actually sends calls from different port. In our case it was 1831:
<--- SIP read from 181.29.146.70:1831 ---> ACK sip:393932891230@162.192.26.181:5060 SIP/2.0 Via: SIP/2.0/UDP 181.29.146.70:1831;branch=z9hG4bK00E0F51004B48887365D000000C5 Route: <sip:181.29.146.70:5060> From: <sip:4369910439372@181.29.146.70>;tag=00E0F51004B48887365D00001AEC To: <sip:393932891230@162.192.26.181>;tag=as7fcd3c74 Call-ID: 00E0F51004B48887365D000016D6@181.29.146.70 CSeq: 42891 ACK Max-Forwards: 70
Asterisk sees it as from 5060:
============== SIPCHANINFO =============== Peer IP: 181.29.146.70 Source IP: 181.29.146.70 From: sip:390331603040@181.29.146.70 Contact: sip:181.29.146.70:5060 Useragent: TELES.iSWITCH Peername: 181.29.146.70 T38Passthrough: 0 ==========================================
To accept calls from such device, you need to set correct port for it in MOR.
