Didx.net

What is didx.net

DIDX (DIDXchange) is a place where VOIP companies buy and sell DID (Direct Inward Dialing) phone numbers.

How to configure a DID purchased from didx.net to work with MOR?

1. Go to purchased DIDs:



2. Then select a DID for edit:

3. Select "New SIP"

In this field you have to enter your DID and server address with the following syntax: DID@example.com

For example:

You have purchased a DID: 37068111888 Your MOR server address is: 127.0.0.1

Then you have to put in this field:

37068111888@127.0.0.1

Don't forget to press the update button!

4. Now login to MOR GUI and go to SETTINGS - Billing -> DIDs



5. Now create a new DID and leave it free at the moment. To create a DID press the marked icon:



6. Now go back to DIDs list: SETTINGS - Billing -> DIDs



7. Edit the DID you created:



8. Select a user you want to reserve a DID for:



9. Reserve the DID for a user - press the marked button:



10. Now you have to select the device you configured earlier with callflow, in this case it will be SIP/1001:



11. Save the changes by pressing the marked button:

How to allow incoming connections from DIDx.net

DIDx.net used IP's

DIDX may send you calls from any of the IP's below.

67.15.180.14 - didx.net
67.15.128.14 - sip1.didx.net
67.15.128.18 - sip2.didx.net
209.62.66.242 - sip3.didx.net
198.101.50.4 - sip4.didx.net
198.101.50.2 - sip5.didx.net
74.55.75.30 - sip6.didx.net
174.133.195.194 - sip7.didx.org
67.19.199.170 - sip1.virtualphoneline.com
88.208.247.34 - eu1.didx.org
88.208.208.34 - eu2.didx.org
74.52.4.234 - sip9.didx.net

Configuration on MOR

In order to receive incoming connections from DIDx you can ether create IP authenticated Providers for all IP's or you can do the following: It is possible to implement multiple DIDx IP addresses by making these changes:

1. Create a provider in MOR, with a name didx:

2. Afterwards, enter any IP (or leave blank) in Provider Network settings, and write down Provider Device ID value, you will need it later.

3. Now connect to your server over ssh and locate this file /etc/asterisk/extensions_mor_didx.conf and find these lines:

[from-didx]
exten => _X.,1,Set(CDR(ACCOUNTCODE)=0)
exten => _X.,2,Goto(mor,${EXTEN},1)

Now you need to change (ACCOUNTCODE)=0 value (0) to Provider Device ID value as follows:

exten => _X.,1,Set(CDR(ACCOUNTCODE)=221)
exten => _X.,2,Goto(mor,${EXTEN},1)

4. Make sure, file /etc/asterisk/sip.conf has this line included:

#include sip_didx.conf

NOTE: sip_didx.conf file contains list of DIDWW server IPs, so this file must be included if you are using DIDx DIDs. Without this list, all incoming calls from DIDx will not be allowed by MOR.

5. Restart Asterisk
Now your system is updated with all the DIDx IP addresses that are listed in their recommendations.

Now there is no need to create one Provider for each IP

That's all