Linksys SPA942 Configuration

First we need to know the IP address of the phone.

On the phone, press the Menu button:

Then press 9 and you should see:

2 Current IP
23.45.67.89 

This is just an example IP address! Yours will be different! Remember it or write it down.

---

Then open your internet browser on the computer which is connected to the same network as your SPA942 and in the address line, type:

http://23.45.67.89

ATTENTION! Change 23.45.67.89 to your IP address that you found earlier!

SPA942 Configuration should open.

---

Click on Admin Login and then on Advanced:

---

Click on SIP and find the RTP Parameters section. Change the RTP Packet Size value to 0.020:

---

Click on Regional, find the Miscellaneous section and change Time Zone to the appropriate one:

---

OPTIONAL: If you experience low audio or your callee can't hear you properly, click on Phone and in the Audio Input Gain(dB) section, change fields values to 6:

---

Click on Ext 1 and do the following:

• In the General section, make sure the Line Enable field is Yes.
• Under NAT Settings, the NAT Keep Alive Enable field should be Yes.

• Proxy and Registration
  • Proxy - the value which provider gave you (an IP).
  • Register - Yes.

• Subscriber Information
  • Display Name - value you got from your provider (username or login).
  • User ID - value you got from your provider (username or login) - same as Display Name.
  • Password - value you got from your provider (password or secret).

---

Finally, click on Submit All Changes:

---

Forward on second line

Call forward on second line is not working. Only 1st line: http://forums.whirlpool.net.au/forum-replies-archive.cfm/756453.html