Difference between revisions of "M4 Media Bypass"

From Kolmisoft Wiki
Jump to navigationJump to search
 
Line 4: Line 4:


On Termination Point, if '''Enforce same Codecs as on Leg A''' is set to '''NO''', then Media will be transcoded IF no matching codecs found.
On Termination Point, if '''Enforce same Codecs as on Leg A''' is set to '''NO''', then Media will be transcoded IF no matching codecs found.
<br><br>
= Open RTP (ORTP) =
For ORTP route you need to set:
* on Origination Point '''Bypass Media''' - '''YES'''
* on Termination Point '''Allow Media from any IP address''' - '''YES'''
* on Termination Point '''Enforce same Codecs as on Leg A''' - '''YES'''

Latest revision as of 11:45, 24 May 2021

On Origination Point, if Bypass Media is set to NO, <- OR ->, on Termination Point Allow Media from any IP address is set to NO, then media goes via Proxy.

On Origination Point, if Bypass Media is set to YES, <- AND ->, on Termination Point Allow Media from any IP address is set to YES, then media does not go via Proxy (Bypass Media).

On Termination Point, if Enforce same Codecs as on Leg A is set to NO, then Media will be transcoded IF no matching codecs found.



Open RTP (ORTP)

For ORTP route you need to set:

  • on Origination Point Bypass Media - YES
  • on Termination Point Allow Media from any IP address - YES
  • on Termination Point Enforce same Codecs as on Leg A - YES