Difference between revisions of "Recommended hardware"
| Line 18: | Line 18: | ||
* [[Centos installation | Centos installation instructions]] | * [[Centos installation | Centos installation instructions]] | ||
Such server should handle up to 500 calls while calls are not reencoded (also known as transcoding)and GUI is not in use. | Such server should handle up to 500 calls while calls are not reencoded (also known as transcoding) and GUI is not in use. | ||
We also recommend to have clean server without any additional packets installed. | We also recommend to have clean server without any additional packets installed. | ||
Revision as of 09:13, 21 June 2013
Main principle - as powerful as possible.
For 1 server solution:
| Component | Minimum requirement | Recommended |  We provide as Hosted Solution |
Comment |
| CPU | Quad Xeon/Intel Core i5+ | any higher CPU | Intel(R) Xeon(R) CPU E3-1245 V2 @ 3.40GHz |
|
| RAM | 4 Gb | 16 GB or more | 32 GB |
|
| HDD | 50 Gb | 100 Gb or more, SDD (Solid State Drives), RAID Type 1 | 2 x 120 GB SSD RAID 1 |
all space must be assigned to / partition |
| OS | Centos 6 | x86_64 | Centos 6.2 |
|
| Brand | Any | Intel, DELL, HP, Fujitsu | Intel |
Such server should handle up to 500 calls while calls are not reencoded (also known as transcoding) and GUI is not in use.
We also recommend to have clean server without any additional packets installed.
For many servers solution:
Asterisk server: same requirements as above, except SSD would not increase performance so it is not needed and 4 GB of RAM is sufficient. CPU is most important component here.
Database server: same requirements as above and SSD is highly recommended here. Fast data storage device and CPU are most important here.
GUI server: same requirements as above, except SSD would not increase performance a lot. HDD with more space is recommended here.
Proxy server: same requirements as above, except 4 GB of RAM and 40 GB on HDD will be enough here. SSD would not increase performance.
