Difference between revisions of "Configuring DIDWW"

Revision as of 21:50, 3 April 2008

The problem with this DID Provider is that it send calls from many IP addresses:

First create new Provider (most important parts are marked in red, Device ID can/will be different in your case - REMEMBER IT!!!):

Then in /etc/asterisk/sip.conf at the very end enter (copy/paste):

[didww_116]
type=friend
context=mor
accountcode=5
host=212.150.36.116

[didww_21]
type=friend
context=mor
accountcode=5
host=212.150.88.21

[didww_34]
type=friend
context=mor
accountcode=5
host=204.11.194.34

[didww_35]
type=friend
context=mor
accountcode=5
host=204.11.194.35

[didww_36]
type=friend
context=mor
accountcode=5
host=204.11.194.36

[didww_37]
type=friend
context=mor
accountcode=5
host=204.11.194.37

[didww_38]
type=friend
context=mor
accountcode=5
host=204.11.194.38

VERY IMPORTANT!!!
accountcode should be == Device ID in your Provider window. In our case it is == 5. Change it accordingly to your correct value!!!

Save the file. Reload Asterisk.

If you are using IAX2 connection from DIDWW - create Provider with type = IAX2 and paste all this in /etc/asterisk/iax.conf

Revision as of 21:50, 3 April 2008 (view source) Mindaugas (talk \| contribs) ← Older edit		Revision as of 21:50, 3 April 2008 (view source) Mindaugas (talk \| contribs) Newer edit →
Line 13:		Line 13:


	First create new Provider (most important parts are marked in red, Device ID can/will be different in your case - REMEMBER IT!!!):		First create new Provider (most important parts are marked in red, '''Device ID can/will be different in your case - REMEMBER IT!!!'''):

	[[Image:didww1.png]]		[[Image:didww1.png]]