Difference between revisions of "Performance Testing with Sipp"

From Kolmisoft Wiki
Jump to navigationJump to search
 
(20 intermediate revisions by 3 users not shown)
Line 1: Line 1:
<nowiki>
<br><br>
 
[[Performance tests]]
 
<br><br>
----
<br><br>
 
With this test environment, we can simulate a single user or multiple users calling through MOR/Asterisk.
 
In the scenario uac_auth.xml, sipp start sending a SIP INVITE to MOR and if AUTH is requested, sipp resend SIP INVITE with PROXY AUTHENTICATION.
 
Playing with sipp parameters, you can increase the call data rate and other variables, such as call duration.
 
 
Download and compile the last sipp:
 
wget  http://surfnet.dl.sourceforge.net/sourceforge/sipp/sipp.3.1.src.tar.gz
tar xvfz sipp.3.1.src.tar.gz
cd sipp.svn
apt-get install libssl-dev / yum -y install openssl-devel
make ossl
 
Edit a new file "users.csv":
 
SEQUENTIAL
 
user001;[authentication username=user001 password=password001]
 
user002;[authentication username=user001 password=password001]
 
user003;[authentication username=user001 password=password001]
 
Edit a new file "uac_auth.xml":


<?xml version="1.0" encoding="ISO-8859-1" ?>
<?xml version="1.0" encoding="ISO-8859-1" ?>
<!DOCTYPE scenario SYSTEM "sipp.dtd">
<!DOCTYPE scenario SYSTEM "sipp.dtd">
<!-- This program is free software; you can redistribute it and/or      -->
<!-- This program is free software; you can redistribute it and/or      -->
<!-- modify it under the terms of the GNU General Public License as    -->
<!-- modify it under the terms of the GNU General Public License as    -->
Line 21: Line 53:
<!--  Sipp 'uac_auth' scenario by Alessandro Marzini info@digilabit.com -->
<!--  Sipp 'uac_auth' scenario by Alessandro Marzini info@digilabit.com -->
<!--                                                                    -->
<!--                                                                    -->
<scenario name="UAC with AUTH scenario">
<scenario name="UAC with AUTH scenario">
   <!-- In client mode (sipp placing calls), the Call-ID MUST be        -->
   <!-- In client mode (sipp placing calls), the Call-ID MUST be        -->
   <!-- generated by sipp. To do so, use [call_id] keyword.               -->
   <!-- generated by sipp. To do so, use [call_id] keyword.             -->
   <send retrans="500">
   <send retrans="500">
     <![CDATA[
     <![CDATA[
       INVITE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
       INVITE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
       Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
       Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
Line 46: Line 76:
       m=audio [media_port] RTP/AVP 0
       m=audio [media_port] RTP/AVP 0
       a=rtpmap:0 PCMU/8000
       a=rtpmap:0 PCMU/8000
     ]]>
     ]]>
   </send>
   </send>
 
<recv response="407" auth="true">
  <recv response="407" auth="true">
  </recv>
  </recv>
  <send>
  <send>
   <![CDATA[
   <![CDATA[
     ACK sip:[service]@[remote_ip]:[remote_port] SIP/2.0
     ACK sip:[service]@[remote_ip]:[remote_port] SIP/2.0
     Via: SIP/2.0/[transport] [local_ip]:[local_port]
     Via: SIP/2.0/[transport] [local_ip]:[local_port]
Line 66: Line 92:
     Subject: Performance Test
     Subject: Performance Test
     Content-Length: 0
     Content-Length: 0
   ]]>
   ]]>
  </send>
  </send>
  <send retrans="500">
  <send retrans="500">
   <![CDATA[
   <![CDATA[
Line 84: Line 108:
     Content-Type: application/sdp
     Content-Type: application/sdp
     Content-Length: [len]
     Content-Length: [len]
     v=0
     v=0
     o=user1 53655765 2353687637 IN IP4 127.0.0.1
     o=user1 53655765 2353687637 IN IP4 127.0.0.1
Line 92: Line 115:
     m=audio [media_port] RTP/AVP 0
     m=audio [media_port] RTP/AVP 0
     a=rtpmap:0 PCMU/8000
     a=rtpmap:0 PCMU/8000
   ]]>
   ]]>
  </send>
  </send>
 
   <recv response="100" optional="true">
   <recv response="100"
        optional="true">
   </recv>
   </recv>
   <recv response="180" optional="true">
   <recv response="180" optional="true">
   </recv>
   </recv>
   <recv response="183" optional="true">
   <recv response="183" optional="true">
   </recv>
   </recv>
   <!-- By adding rrs="true" (Record Route Sets), the route sets        -->
   <!-- By adding rrs="true" (Record Route Sets), the route sets        -->
   <!-- are saved and used for following messages sent. Useful to test  -->
   <!-- are saved and used for following messages sent. Useful to test  -->
Line 111: Line 128:
   <recv response="200" rtd="true">
   <recv response="200" rtd="true">
   </recv>
   </recv>
   <!-- Packet lost can be simulated in any send/recv message by        -->
   <!-- Packet lost can be simulated in any send/recv message by        -->
   <!-- by adding the 'lost = "10"'. Value can be [1-100] percent.      -->
   <!-- by adding the 'lost = "10"'. Value can be [1-100] percent.      -->
   <send>
   <send>
     <![CDATA[
     <![CDATA[
       ACK sip:[service]@[remote_ip]:[remote_port] SIP/2.0
       ACK sip:[service]@[remote_ip]:[remote_port] SIP/2.0
       Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
       Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
Line 127: Line 142:
       Subject: Performance Test
       Subject: Performance Test
       Content-Length: 0
       Content-Length: 0
     ]]>
     ]]>
   </send>
   </send>
   <!-- This delay can be customized by the -d command-line option      -->
   <!-- This delay can be customized by the -d command-line option      -->
   <!-- or by adding a 'milliseconds = "value"' option here.            -->
   <!-- or by adding a 'milliseconds = "value"' option here.            -->
   <pause/>
   <pause/>
   <!-- The 'crlf' option inserts a blank line in the statistics report. -->
   <!-- The 'crlf' option inserts a blank line in the statistics report. -->
   <send retrans="500">
   <send retrans="500">
     <![CDATA[
     <![CDATA[
       BYE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
       BYE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
       Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
       Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
Line 149: Line 160:
       Subject: Performance Test
       Subject: Performance Test
       Content-Length: 0
       Content-Length: 0
     ]]>
     ]]>
   </send>
   </send>
   <recv response="200" crlf="true">
   <recv response="200" crlf="true">
   </recv>
   </recv>
   <!-- definition of the response time repartition table (unit is ms)  -->
   <!-- definition of the response time repartition table (unit is ms)  -->
   <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200"/>
   <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200"/>
   <!-- definition of the call length repartition table (unit is ms)    -->
   <!-- definition of the call length repartition table (unit is ms)    -->
   <CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000"/>
   <CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000"/>
</scenario>
Then run this:
./sipp -inf users.csv -sf uac_auth.xml -s <extension_to_call> <mor_sip_server_sip>
For a more complete sipp syntax, look here:


</scenario>
http://sipp.sourceforge.net/doc1.1/reference.html#xmlsyntax
 
 
----
 
=== Configuration pointers for testing ===
 
==== sip.conf ====
 
[general]
context=playback_test
;rtptimeout=60 
;rtpholdtimeout=300
 
[1000]
type = friend
host = dynamic
username = 1000
secret = 1000
nat = no
context = playback_test
disallow = all
allow = alaw
 
 
[1001]
type = friend
host = dynamic
username = 1001
secret = 1001
nat = no
context = playback_test
disallow = all
allow = alaw
 
==== extensions.conf ====


</nowiki>
[playback_test]
exten => _X.,1,Answer
exten => _X.,2,Background(tt-monkeys)
exten => _X.,3,Goto(2)
;exten => _X.,3,Hangup

Latest revision as of 11:59, 28 April 2010



Performance tests





With this test environment, we can simulate a single user or multiple users calling through MOR/Asterisk.

In the scenario uac_auth.xml, sipp start sending a SIP INVITE to MOR and if AUTH is requested, sipp resend SIP INVITE with PROXY AUTHENTICATION.

Playing with sipp parameters, you can increase the call data rate and other variables, such as call duration.


Download and compile the last sipp: 

wget  http://surfnet.dl.sourceforge.net/sourceforge/sipp/sipp.3.1.src.tar.gz
tar xvfz sipp.3.1.src.tar.gz
cd sipp.svn
apt-get install libssl-dev / yum -y install openssl-devel
make ossl

Edit a new file "users.csv":

SEQUENTIAL

user001;[authentication username=user001 password=password001]

user002;[authentication username=user001 password=password001]

user003;[authentication username=user001 password=password001]

Edit a new file "uac_auth.xml":

<?xml version="1.0" encoding="ISO-8859-1" ?> <!DOCTYPE scenario SYSTEM "sipp.dtd"> <scenario name="UAC with AUTH scenario"> 

 <send retrans="500">
   <![CDATA[
     INVITE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
     Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
     From: [field0] <sip:[field0]@[local_ip]:[local_port]>;tag=[pid]SIPpTag00[call_number]
     To: sut <sip:[service]@[remote_ip]:[remote_port]>
     Call-ID: [call_id]
     CSeq: 1 INVITE
     Contact: sip:[field0]@[local_ip]:[local_port]
     Max-Forwards: 70
     Subject: Performance Test
     Content-Type: application/sdp
     Content-Length: [len]
     v=0
     o=user1 53655765 2353687637 IN IP[local_ip_type] [local_ip]
     s=-
     c=IN IP[media_ip_type] [media_ip]
     t=0 0
     m=audio [media_port] RTP/AVP 0
     a=rtpmap:0 PCMU/8000
   ]]>
 </send>
<recv response="407" auth="true">
</recv>
<send>
  <![CDATA[
    ACK sip:[service]@[remote_ip]:[remote_port] SIP/2.0
    Via: SIP/2.0/[transport] [local_ip]:[local_port]
    From: [field0] <sip:[field0]@[local_ip]:[local_port]>;tag=[call_number]
    To: sut <sip:[service]@[remote_ip]:[remote_port]>[peer_tag_param]
    Call-ID: [call_id]
    CSeq: 1 ACK
    Contact: sip:[field0]@[local_ip]:[local_port]
    Max-Forwards: 70
    Subject: Performance Test
    Content-Length: 0
  ]]>
</send>
<send retrans="500">
  <![CDATA[
    INVITE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
    Via: SIP/2.0/[transport] [local_ip]:[local_port]
    From: [field0] <sip:[field0]@[local_ip]:[local_port]>;tag=[call_number]
    To: sut <sip:[service]@[remote_ip]:[remote_port]>
    Call-ID: [call_id]
    CSeq: 2 INVITE
    Contact: sip:[field0]@[local_ip]:[local_port]
    [field1]
    Max-Forwards: 70
    Subject: Performance Test
    Content-Type: application/sdp
    Content-Length: [len]
    v=0
    o=user1 53655765 2353687637 IN IP4 127.0.0.1
    s=-
    t=0 0
    c=IN IP4 [media_ip]
    m=audio [media_port] RTP/AVP 0
    a=rtpmap:0 PCMU/8000
  ]]>
</send>
 <recv response="100" optional="true">
 </recv>
 <recv response="180" optional="true">
 </recv>
 <recv response="183" optional="true">
 </recv>
 <recv response="200" rtd="true">
 </recv>
 <send>
   <![CDATA[
     ACK sip:[service]@[remote_ip]:[remote_port] SIP/2.0
     Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
     From: [field0] <sip:[field0]@[local_ip]:[local_port]>;tag=[pid]SIPpTag00[call_number]
     To: sut <sip:[service]@[remote_ip]:[remote_port]>[peer_tag_param]
     Call-ID: [call_id]
     CSeq: 1 ACK
     Contact: sip:[field0]@[local_ip]:[local_port]
     Max-Forwards: 70
     Subject: Performance Test
     Content-Length: 0
   ]]>
 </send>
 <pause/>
 <send retrans="500">
   <![CDATA[
     BYE sip:[service]@[remote_ip]:[remote_port] SIP/2.0
     Via: SIP/2.0/[transport] [local_ip]:[local_port];branch=[branch]
     From: [field0] <sip:[field0]@[local_ip]:[local_port]>;tag=[pid]SIPpTag00[call_number]
     To: sut <sip:[service]@[remote_ip]:[remote_port]>[peer_tag_param]
     Call-ID: [call_id]
     CSeq: 2 BYE
     Contact: sip:[field0]@[local_ip]:[local_port]
     Max-Forwards: 70
     Subject: Performance Test
     Content-Length: 0
   ]]>
 </send>
 <recv response="200" crlf="true">
 </recv>
 <ResponseTimeRepartition value="10, 20, 30, 40, 50, 100, 150, 200"/>
 <CallLengthRepartition value="10, 50, 100, 500, 1000, 5000, 10000"/>

</scenario>

Then run this:

./sipp -inf users.csv -sf uac_auth.xml -s <extension_to_call> <mor_sip_server_sip>

For a more complete sipp syntax, look here:

http://sipp.sourceforge.net/doc1.1/reference.html#xmlsyntax


Configuration pointers for testing

sip.conf

[general]
context=playback_test
;rtptimeout=60  
;rtpholdtimeout=300

[1000]
type = friend
host = dynamic
username = 1000
secret = 1000
nat = no
context = playback_test
disallow = all
allow = alaw



[1001]
type = friend
host = dynamic
username = 1001
secret = 1001
nat = no
context = playback_test
disallow = all
allow = alaw

extensions.conf

[playback_test]
exten => _X.,1,Answer
exten => _X.,2,Background(tt-monkeys)
exten => _X.,3,Goto(2)
;exten => _X.,3,Hangup
Retrieved from "https://wiki.kolmisoft.com/index.php?title=Performance_Testing_with_Sipp&oldid=6628"