Difference between revisions of "Testing MOR PRO installation"

Latest revision as of 16:39, 25 March 2011

IMPORTANT! INFORMATION IN THIS TOPIC IS OUTDATED AND NOT USED ANYMORE!

Initial tests

MySQL and Asterisk connectivity
Fax2Email modules
H323 module
#mime-construct
If g723 and g729 codecs are installed
Connected users
Autodialer
Part of GUI

This can also be done manually.

Login to the system

Go to the GUI: http://<my-ip-address>/billing

Login as: admin/admin

If you can't connect or are unable to access, reboot the PC where MOR is installed and try again.

Configuration file

Go to /home/mor/config/environment.rb

Web_URL - enter the correct URL where MOR GUI can be reached, e.g. http://23.45.67.89/billing
- Do not leave 0.0.0.0 - it's a bad value. Enter the real IP by which you access GUI.
Recordings_Folder - enter the correct URL where recordings can be reached (they can be on a different server, e.g. http://98.65.43.21/billing/recordings)
Add-ons - enable add-ons if you purchased them. Note: enabling add-ons when they are not installed will interfere with your GUI.

Restart Apache.

If you have Debian:

/etc/init.d/apache2 restart

If you have Centos/Fedora:

/etc/init.d/httpd restart

h323.conf

Enter server's IP as described here: One-way audio or not audio at all

GUI

Go to this page and make sure it is displayed correctly:

SETTINGS - Users - Devices - create new device/delete device

Register as a new user over GUI (registration from login page). Enter your email address, and after registration, check whether you have received confirmation.

Google Maps - enter key from this page: Get Google Maps key

Activation test

Configure softphone with following settings: 101/101 and call any number - let's say 123456789. On the CLI, the normal call process should be visible. If MOR says, "MOR is not authorized to work on this computer", there are problems with the serial.

Or in Asterisk CLI write:

module unload app_mor.so
module load app_mor.so

It should say something similar to:

[Dec 10 08:49:27] NOTICE[19319]: app_mor.c:4050 load_module: MOR PRO is authorized to work on this computer.
Loaded app_mor.so => (MOR Billing Solution v0.5.0.6)

This means everything is okay.

VoiceMail

Dial *97, you should hear: Comedian Mail Mailbooox... or You haaaave no messages...

WEB Callback

Login as user 101: (101/101)

Go to PERSONAL MENU - Various - Callback and enter any numbers, press Execute. On Asterisk CLI you should see:

-- Attempting call on Local/21233@mor_cb_src/n for 23234@mor_cb_dst:1 (Retry 1)
-- Executing [21233@mor_cb_src:1] NoOp("Local/21233@mor_cb_src-18d8,2", "MOR CB calls src!") in new stack
....

Possible errors:

Errno::EACCES (Permission denied - /tmp/mor_cf_xxxx or /var/spool/asterisk/outgoing/mor_cf_xxxx)

A Errno::EXDEV occurred in functions#activate_callback:

Fix it.

No action on Asterisk CLI - enter correct AMI settings in MOR GUI Settings - AMI Interface

Crontab for Auto-Dialer

Skip this section if you do not have an Auto-Dialer add-on.

Check /home/mor_ad/mor_ad_cron.log, you should see something like this:

2007-12-07 00:01:53 - Start of MOR Auto-Dialer Cron script.
DB config. Host: localhost, DB name: mor, user: mor, psw: mor, port: 3306.
Successfully connected to database.
No campaigns found active this time: 00:01:53
Total campaigns retrieved: 0

For multi-server systems

Configure AMI connections

On Asterisk servers, configure /etc/asterisk/manager.conf to allow the GUI server to connect to Asterisk servers over AMI.

[mor]
secret = morsecret
deny=0.0.0.0/0.0.0.0
permit=127.0.0.1/255.255.255.0
permit=10.70.10.10/255.255.255.0
read = system,call,log,verbose,command,agent,user,config
write = system,call,log,verbose,command,agent,user,config

NOTE: 10.70.10.10 is an EXAMPLE IP - put the correct one in your system.

Enter Asterisk servers into GUI interface

Enter correct settings to allow GUI to manage Asterisk servers over AMI.

Read below only if Asterisk isn't on the same server

If Asterisk is running on a different machine, then you need to setup a correct recordings folder. 1 Make sure Apache is running on the Asterisk server; secondly, make sure you have a correct "Recordings_Folder" value. (You have to enter something like this: http://asterisk.server/recordings/ ). Now delete /home/mor/public/recordings symlink from the GUI server. To test, try to open the recordings page in your GUI.

Final steps

If this server has GUI, be sure to change variable ExceptionNotifier.email_prefix = "[CLIENT] " variable to your contacts. For example:

ExceptionNotifier.email_prefix = "[Digital Solutions .132] " (where .132 are the last digits of the server's IP address).

Afterwards, restart Apache.

So if you have a problem with your GUI, the authors will get noticed instantly.

Note to engineers: Always update the server list with new data.

@@ Line 1: / Line 1: @@
+<center><big><big><big><b>IMPORTANT! INFORMATION IN THIS TOPIC IS OUTDATED AND NOT USED ANYMORE!</b></big></big></big></center>
 ==Initial tests==
-Run '''/usr/src/mor/test.sh''' to test
 * MySQL and Asterisk connectivity
@@ Line 12: / Line 14: @@
 * Part of GUI
-[[MOR Install Testing Manually Old | That can be done manually also]].
+[[MOR Install Testing Manually Old | This can also be done manually]].
 ==Login to the system==
@@ Line 18: / Line 20: @@
 Go to the GUI: ''http://<my-ip-address>/billing''
-And login as: '''admin/admin'''
+Login as: '''admin/admin'''
-If you can't connect or unable to access, reboot PC where MOR is installed and try again.
+If you can't connect or are unable to access, reboot the PC where MOR is installed and try again.
 ==Configuration file==
@@ Line 26: / Line 28: @@
 Go to ''/home/mor/config/environment.rb''
-* '''Web_URL''' - enter correct URL where MOR GUI can be reached, e.g. http://23.45.67.89/billing
+* '''Web_URL''' - enter the correct URL where MOR GUI can be reached, e.g. http://23.45.67.89/billing
-** Do not leave 0.0.0.0 - it's bad value, enter real IP by which you access GUI
+** Do not leave 0.0.0.0 - it's a bad value. Enter the real IP by which you access GUI.
-* '''Recordings_Folder''' - enter correct URL where recordings can be reached (they can be on different server, e.g. http://98.65.43.21/billing/recordings)
+* '''Recordings_Folder''' - enter the correct URL where recordings can be reached (they can be on a different server, e.g. http://98.65.43.21/billing/recordings)
-* '''Addons''' - enable addons if you purchased them. Note - enabling them when they are not installed will mess your GUI
+* '''Add-ons''' - enable add-ons if you purchased them. Note: enabling add-ons when they are not installed will interfere with your GUI.
-Restart Apache:
+Restart Apache.
 If you have Debian:
   /etc/init.d/apache2 restart
-Or Centos/Fedora:
+If you have Centos/Fedora:
   /etc/init.d/httpd restart
+== h323.conf ==
+Enter server's IP as described here: [[One-way audio or not audio at all]]
+<br>
 ==GUI==
-Go to and make sure page is displayed correctly:
+Go to this page and make sure it is displayed correctly:
 * SETTINGS - Users - Devices - create new device/delete device
-Register new user over GUI (registration from login page), enter your email and check after registration if you received it
+Register as a new user over GUI (registration from login page). Enter your email address, and after registration, check whether you have received confirmation.
-* Google Maps - ivesti rakta is psl: [[Get Google Maps key]]
+* Google Maps - enter key from this page: [[Get Google Maps key]]
 <br>
@@ Line 53: / Line 62: @@
 ==Activation test==
-Configure softphone with following settings: 101/101 and call any number, let's say 123456789. On the CLI normal call process should be visible. If MOR tells, that "MOR is not authorized to work on this computer" - that means there are problems with serial.
+Configure softphone with following settings: 101/101 and call any number - let's say 123456789. On the CLI, the normal call process should be visible. If MOR says, "MOR is not authorized to work on this computer", there are problems with the serial.
 Or in Asterisk CLI write:
@@ Line 60: / Line 69: @@
   module load app_mor.so
-It should say somethign similar:
+It should say something similar to:
   [Dec 10 08:49:27] NOTICE[19319]: app_mor.c:4050 load_module: MOR PRO is authorized to work on this computer.
   Loaded app_mor.so => (MOR Billing Solution v0.5.0.6)
-This means everything is ok.
+This means everything is okay.
-==Fax2Email==
-Go to device's 102 settings (http://YOUR_IP/billing/devices/pdffaxemail_edit/1) and change fax email to yours.
-Register your softphone with settings 101/101 (if you can't make sure you [[Ports which should be opened|opened necessary ports]]).
-Using your softphone dial '''*9901''' - you should get email with test fax attached as PDF.
-Go to:
-* '''STATISTICS-VARIOUS-FAXES (http://YOUR_IP/billing/stats/faxes_list/2) - press on PDF - should open your received fax''' <--- THIS WORKS ONLY FOR NEW INSTALLATIONS!
 <br>
@@ Line 108: / Line 105: @@
 ==Crontab for Auto-Dialer ==
-Skip this section if you do not have Auto-Dialer addon.
+Skip this section if you do not have an Auto-Dialer add-on.
 Check ''/home/mor_ad/mor_ad_cron.log'', you should see something like this:
@@ Line 125: / Line 122: @@
 === Configure AMI connections ===
-On Asterisk servers configure /etc/asterisk/manager.conf to allow GUI server to connect to Asterisk servers over AMI
+On Asterisk servers, configure /etc/asterisk/manager.conf to allow the GUI server to connect to Asterisk servers over AMI.
   [mor]
@@ Line 135: / Line 132: @@
   write = system,call,log,verbose,command,agent,user,config
-NOTE: 10.70.10.10 is '''EXAMPLE''' IP - put correct one in your system.
+NOTE: 10.70.10.10 is an '''EXAMPLE''' IP - put the correct one in your system.
 === Enter Asterisk servers into GUI interface ===
-Enter correct settings to allow GUI to manage Asterisk servers over AMI
+Enter correct settings to allow GUI to manage Asterisk servers over AMI.
-== Read below only if asterisk isn't on the same server ==
+== Read below only if Asterisk isn't on the same server ==
-If Asterisk is running on different machine, then you need to setup correct recordings folder. 1 Make sure apache is running on Asterisk server, secondly make sure you have correct "Recordings_Folder" value (You have to enter something like this: http://asterisk.server/recordings/ ). Now delete /home/mor/public/recordings symlink from GUI server. To test, try to open recordings page in your GUI.
+If Asterisk is running on a different machine, then you need to setup a correct recordings folder. 1 Make sure Apache is running on the Asterisk server; secondly, make sure you have a correct "Recordings_Folder" value. (You have to enter something like this: http://asterisk.server/recordings/ ). Now delete /home/mor/public/recordings symlink from the GUI server. To test, try to open the recordings page in your GUI.
 ===Final steps===
-If this server has GUI, make sure change variable ExceptionNotifier.email_prefix = "[CLIENT] " variable to your needs. For example:
+If this server has GUI, be sure to change variable ExceptionNotifier.email_prefix = "[CLIENT] " variable to your contacts. For example:
-ExceptionNotifier.email_prefix = "[Digital Solutions .132] " (where .132 is last digits of server).
+ExceptionNotifier.email_prefix = "[Digital Solutions .132] " (where .132 are the last digits of the server's IP address).
+Afterwards, restart Apache.
+So if you have a problem with your GUI, the authors will get noticed instantly.
+'''Note to engineers:''' Always update the server list with new data.
+----

Difference between revisions of "Testing MOR PRO installation"

Latest revision as of 16:39, 25 March 2011

Contents