Difference between revisions of "Conference with MOR + Trixbox"
| Line 7: | Line 7: | ||
First of all you need a user and device in [http://www.kolmisoft.com/billing-and-routing/ MOR]for DID channel. Make sure you use IP authentication and use the exact settings in the image below (change 192.168.0.165 to Trixbox's ip address and Trunk? should be set to Yes). | First of all you need a user and device in [http://www.kolmisoft.com/billing-and-routing/ MOR] for a DID channel. Make sure you use IP authentication and use the exact settings in the image below (change 192.168.0.165 to Trixbox's ip address and Trunk? should be set to Yes). | ||
[[Image:device2.png]] | [[Image:device2.png]] | ||
| Line 14: | Line 14: | ||
[[Image:didmap.png]] | [[Image:didmap.png]] | ||
== Settings for Trixbox == | == Settings for Trixbox == | ||
Revision as of 11:46, 26 May 2010
IT IS NOT POSSIBLE RUN CONFERENCE ONLY WITH MOR, YOU NEED EXTERNAL SOFTWARE, LIKE TRIXBOX
Tested with 0.7, 0.8 MORs and 2.6.2.3 trixbox.
Settings for MOR
First of all you need a user and device in MOR for a DID channel. Make sure you use IP authentication and use the exact settings in the image below (change 192.168.0.165 to Trixbox's ip address and Trunk? should be set to Yes).
Create a DID and map it to the device.
Settings for Trixbox
Log in as administrator to Trixbox and create a Trunk with the following settings: Change 192.168.0.148 to your MOR server IP address and 1005 username and secret to the appropriate settings.
Create Conference with these settings:
Then create a DID (Inbound route):
Then try to call from any device to 8000 in MOR. You should hear a woman's voice and instructions on what you need to do.
Of course, if you change settings everywhere from 8000 to your real DID, it will work as well.
