Difference between revisions of "One-way audio or not audio at all"
From Kolmisoft Wiki
Jump to navigationJump to search
| Line 1: | Line 1: | ||
* /etc/init.d/iptables stop | * /etc/init.d/iptables stop | ||
= Device is SIP = | |||
* Make sure sip.conf are correctly configured if [[Asterisk under NAT | Asterisk is behind NAT]] | * Make sure sip.conf are correctly configured if [[Asterisk under NAT | Asterisk is behind NAT]] | ||
* Make sure NAT settings are correct (nat=yes) | * Make sure NAT settings are correct (nat=yes) | ||
* Make sure you are using same RTP range as your provider | * Make sure you are using same RTP range as your provider | ||
* Make '''canreinvite = no''' in device settings | |||
= Device is H323 = | |||
* While connecting with H.323 client you get no audio or garbled audio and messages like this on Asterisk console: rtp.c:489 ast_rtp_read: Unknown RTP codec 107 received. Try to disable Speex or some other codec on Asterisk or/and client side. | * While connecting with H.323 client you get no audio or garbled audio and messages like this on Asterisk console: rtp.c:489 ast_rtp_read: Unknown RTP codec 107 received. Try to disable Speex or some other codec on Asterisk or/and client side. | ||
* When no audio in H323 calls, make sure in '''/etc/asterisk/h323.conf''' you have '''binaddr''' set to your servers real IP address. | * When no audio in H323 calls, make sure in '''/etc/asterisk/h323.conf''' you have '''binaddr''' set to your servers real IP address. | ||
** [[Image:h323_binaddr.png]] | ** [[Image:h323_binaddr.png]] | ||
** Restart Asterisk after that | ** Restart Asterisk after that | ||
Revision as of 08:34, 6 July 2009
- /etc/init.d/iptables stop
Device is SIP
- Make sure sip.conf are correctly configured if Asterisk is behind NAT
- Make sure NAT settings are correct (nat=yes)
- Make sure you are using same RTP range as your provider
- Make canreinvite = no in device settings
Device is H323
- While connecting with H.323 client you get no audio or garbled audio and messages like this on Asterisk console: rtp.c:489 ast_rtp_read: Unknown RTP codec 107 received. Try to disable Speex or some other codec on Asterisk or/and client side.
- When no audio in H323 calls, make sure in /etc/asterisk/h323.conf you have binaddr set to your servers real IP address.
- Restart Asterisk after that
