|
|
| (10 intermediate revisions by the same user not shown) |
| Line 1: |
Line 1: |
|
| |
|
| <mkmeta>Necessary steps to prepare server for MOR or M2 installation</mkmeta> | | <mkmeta>Instructions to prepare a server for the MOR or M4 softswitch installation</mkmeta> |
| * Choose the hardware according to [[Recommended_hardware | recommended specifications]]
| | 1. Choose the hardware according to [[Recommended_hardware | recommended specifications]] |
| ** The minimal requirement to run MOR is one server ([[Implementations |see MOR implementations]]).
| | |
| ** The minimal requirement to test M4 is one server, but for production you should prepare two servers, where 1st server - KAMAILIO/RTP/SEMS (this server MUST have Intel I210, I350 or X550T NIC if you need over 700cc), 2nd server - GUI/Elasticsearch/DB/Radius ([[M4_System_Architecture |see M4 architecture]])
| | 2. Install the Rocky 9 minimal. There should be NO separate user, home, tmp, var, varlog, etc. partitions. </span> |
|
| |
|
| * Install the fresh minimal [[Centos7_installation |Centos 7]] installation.
| | 3. Open [[Ports_which_should_be_opened |necessary ports]] |
|
| |
|
| <span style="color:#ff0000"> '''IMPORTANT!''' All free space should be assigned to root ("/") partition. There should be NO separate user, home, tmp, var, varlog, etc. partitions. </span>
| | 4. Allow connections from the following IP: 157.90.244.37 |
|
| |
|
| <html>
| | 5. Send us your SSH access: IP and root password. |
| <iframe width="800" height="600" src="https://www.youtube.com/embed/viSj2R9MLKs" frameborder="0"></iframe>
| |
| </html>
| |
| | |
| | |
| * Open [[Ports_which_should_be_opened |necessary ports]]
| |
| | |
| * Allow connections from the following IP: 77.240.248.90
| |
| | |
| * Send us your IP and root password.
| |
| | |
| The installation will be done by Kolmisoft engineers within 48 hours.
| |
Latest revision as of 12:00, 30 July 2024
1. Choose the hardware according to recommended specifications
2. Install the Rocky 9 minimal. There should be NO separate user, home, tmp, var, varlog, etc. partitions.
3. Open necessary ports
4. Allow connections from the following IP: 157.90.244.37
5. Send us your SSH access: IP and root password.
