Configuring DIDWW

The problem with this DID Provider is that it send calls from many IP addresses:

• 212.150.36.116
• 212.150.88.20
• 212.150.88.21
• 204.11.194.34
• 204.11.194.35
• 204.11.194.36
• 204.11.194.37
• 204.11.194.38

---

First create new Provider (most important parts are marked in red, Device ID can/will be different in your case - REMEMBER IT!!!):

Then in /etc/asterisk/sip.conf at the very end enter (copy/paste):

[didww_116]
type=friend
context=mor
accountcode=5
host=212.150.36.116

[didww_21]
type=friend
context=mor
accountcode=5
host=212.150.88.21

[didww_34]
type=friend
context=mor
accountcode=5
host=204.11.194.34

[didww_35]
type=friend
context=mor
accountcode=5
host=204.11.194.35

[didww_36]
type=friend
context=mor
accountcode=5
host=204.11.194.36

[didww_37]
type=friend
context=mor
accountcode=5
host=204.11.194.37

[didww_38]
type=friend
context=mor
accountcode=5
host=204.11.194.38

========== VERY IMPORTANT!!! ==========
accountcode should be == Device ID in your Provider window. In our case it is == 5. Change it accordingly to your correct value!!!

DID configuration

Then:

• Save the file.
• Reload Asterisk.
• Create DID - IN E164 FORMAT!!!!!!!!
• Assign to DIDWW Provider
• Assign to some device
• Configure correct routing(mapping) in www.didww.com:

Configuration in www.didww.com

We will assign Thailand, Bangkok number to our server:

First we need to create "mapping", e.g. route to our server, in format as SIP URI: SIP/did_on_our_server@our_server_ip:

It should look like this:

Aftre that we need to assign our DID to our just created "mapping":

It should look like this:

Troubleshooting

Watch Asterisk CLI to see whats happening.

Maybe you have DID in wrong format!? E.g. not E.164 compatible?

---

If you are using IAX2 connection from DIDWW - create Provider with type = IAX2 and paste sip.conf configuration in /etc/asterisk/iax.conf