MOR Install Testing Manually Old

GUI

• SETTINGS - Setup - Settings - Save changes (press on it)
• SETTINGS - Setup - (PBX-Functions) - VoiceMail - SAVE (press it)
• PDF generation: /billing/accounting/generate_test_pdf

Realtime

NOTE: From 0.6.14 install script test.sh script is used to check for realtime.

In Asterisk CLI:

realtime mysql status

Should show something like:

Connected to mor@127.0.0.1, port 3306 with username mor for 4 days, 13 hours, 13 minutes, 29 seconds.

If you see this:

ERROR[8898]: res_config_mysql.c:637 mysql_reconnect: MySQL RealTime: Ping failed (2006).  Trying an explicit reconnect.

That's ok. It means connection to MySQL timed out, but connection is reestablished. Try previous command and result should be ok.

Codecs

NOTE: From 0.6.14 install script test.sh script is used to check for installed codecs.

In Asterisk CLI:

show translation

Should show g723 and g729 installed:

If g723 and g729 lines look like this:

g723    -   -    -    -        -     -    -     -    -     -    -    -    -
g729    -   -    -    -        -     -    -     -    -     -    -    -    -

Then - install g723/g729 codecs.

Fax2Email

NOTE: From 0.6.14 install script test.sh script is used to check for installed fax applications

In Asterisk CLI:

module show like fax

It should show:

CLI> module show like fax
Module                         Description                              Use Count
app_nv_faxdetect.so            NV Fax Detection Application             0
app_rxfax.so                   Trivial FAX Receive Application          0
app_txfax.so                   Trivial FAX Transmit Application         0
3 modules loaded

H323

NOTE: From 0.6.14 install script test.sh script is used to check for installed H323 support.

In Asterisk CLI:

module show like h323

mime-construct

NOTE: From 0.6.14 install script test.sh script is used to check for installed mime-construct.

It is used to send faxes.

Write in bash to test:

mime-construct

You should see:

mime-construct: no recipients specified

If you see something else - reinstall mime-construct

Autodialer

Skip this section if you do not have Auto-Dialer addon.

Enable crontab logs:

/etc/syslog.conf uncomment cron.*

Execute:

/etc/init.d/sysklogd restart

Change editor from vi to some usable one:

In file /root/.bashrc at the end add: export EDITOR='mcedit'

Relogin to root account for this change to take effect.

Execute:

crontab -e

In the file's end add:

*/5 * * * * /home/mor_ad/mor_ad_cron >> /home/mor_ad/mor_ad_cron.log

Make sure you pressed ENTER after this line!!! If you don't it will not work.