View source for Conference with MOR + Trixbox

'''IT IS NOT POSSIBLE RUN CONFERENCE ONLY WITH MOR, YOU NEED EXTERNAL SOFTWARE, LIKE TRIXBOX'''

'''Tested with 0.7, 0.8 MORs and 2.6.2.3 trixbox.'''


== Settings for MOR ==


First of all you need a user and device in [http://www.kolmisoft.com/billing-and-routing/ MOR] for a DID channel. Make sure you use IP authentication and use the exact settings in the image below (change 192.168.0.165 to Trixbox's IP address, and Trunk? should be set to Yes).

[[Image:device2.png]]

Create a DID and map it to the device.

[[Image:didmap.png]]

== Settings for Trixbox ==

Log in as administrator to Trixbox and create a Trunk with the following settings: Change 192.168.0.148 to your MOR server IP address and 1005 '''username and secret''' to the appropriate settings.

[[Image:trixboxtrunk.png]]

Create Conference with these settings:

[[Image:conference.png]]

Then create a DID (Inbound route):

[[Image:DID1.png]]
[[Image:DID2.png]]

Then try to call from any device to 8000 in MOR. You should hear a woman's voice and instructions on what you need to do.

Of course, if you change settings everywhere from 8000 to your real DID, it will work as well.