Difference between revisions of "M4 How to make first call"

From Kolmisoft Wiki
Jump to navigationJump to search
 
(23 intermediate revisions by the same user not shown)
Line 2: Line 2:


Before making configurations, please read the [[M4 Routing Logic]] to see the bigger picture.
Before making configurations, please read the [[M4 Routing Logic]] to see the bigger picture.
[[Image:warning.png|15px]]'''IMPORTANT!''' The configuration will allow any CallerID to dial any Destination from the set IP. Adjust settings accordingly to suit your needs.
<br><br>
=Read this before you start=
''Before making configurations, please read the [[M4 Routing Logic]] to see the bigger picture.''
<br><br>
This small guide will show how to make your first call after system installation.


[[Image:warning.png|15px]]'''IMPORTANT!''' The configuration will allow any CallerID to dial any Destination from the set IP. Adjust settings accordingly to suit your needs.
[[Image:warning.png|15px]]'''IMPORTANT!''' The configuration will allow any CallerID to dial any Destination from the set IP. Adjust settings accordingly to suit your needs.
Line 47: Line 39:
<br><br>
<br><br>
[[File:M4 Tariff successfully created.png|1000px]]
[[File:M4 Tariff successfully created.png|1000px]]
<br><br>
Repeat the same process to create a '''Sell Tariff''' for your Clients.
<br><br>
<br><br>


Line 67: Line 61:
<br><br>
<br><br>
[[File:M4 Add Rate.png|1000px]]
[[File:M4 Add Rate.png|1000px]]
<br><br>
Repeat the same process to add rates to your '''Sell Tariff''' for your Clients. Just this time add a higher rate than your buying rate to make a profit.
<br><br>
<br><br>


=Create Terminator=
=Create Terminator=


Create a User that will be your Supplier (will sell traffic to you).
''Read more about [[M4 Users|M4 Users]].''
<br><br>


Set min/max balance for this User (example 0, 10).
Terminator is your Supplier (Provider). Go to '''USERS''' and click [[file:icon add.png]]'''Add new'''.
<br><br>
[[File:M4 Users Add New.png|1000px]]
<br><br>
* Create a '''Username''' and select "Suggest strong password"
* Set the '''Balance range''', for example, MIN: 0, MAX 1000. MAX refers to the credit limit that you have with your Supplier. MIN is not relevant here, unless you have a bilateral interconnection agreement with your Supplier and they can be your Client AND Supplier. If you have a bilateral interconnection agreement, then you can set MIN: -1000 which means that you give such a credit limit to them.
* Scroll down and click '''Create'''. You'll see a message "USER SUCCESSFULLY CREATED".
 
<br><br>


Create Device for Supplier and mark it as 'Act as Termination Point', mark it '''Active''', set '''Tariff''' for it. Set '.*' (without quotes) in '''Source (CallerID) Allow''' field.  
[[File:M4 Create Terminator.png|1000px]]
<br><br>


The device should be IP Auth. Enter the proper IP for this Device (where to call will go)
=Create Termination Point=


''Read more about [[M4 Connection Points|M4 Connection Points]].''
<br><br>
Click the '''Connection Point''' icon and then the '''ADD NEW CONNECTION POINT''' button to create a new Connection Point for Terminator.
<br><br>
[[File:M4 Create Connection Point.png|1000px]]
<br><br>
[[File:Add New Connection Point.png|1000px]]
<br><br>
Fill in the details, choose '''YES''' in '''Act as Termination Point''' field and click '''Create'''.
<br><br>
[[File:Act as Termination Point.png|1000px]]
<br><br>
You'll get a confirmation '''CONNECTION POINT CREATED'''.
<br><br>
Next, fill in the details (you should get these details from your Supplier's interconnection form).
<br><br>
Enter the proper '''IP Address''' and '''Port''' in Authentication.
<br><br>
[[File:M4 Authentication.png|500px]]
<br><br>
Set '.*' (without quotes) in '''Source (CallerID) Allow''' field. This will allow any CallerID to dial. Read more about [[M4 Regexp Examples|M4 Regexp Examples]].
<br><br>
[[File:Set Source (CallerID) Allow.png|500px]]
<br><br>
Set the '''Tariff''' that you previously created for it. Read more about [[M4 Tariffs|M4 Tariffs]].
<br><br>
[[File:Set Tariff.png|500px]]
<br><br>
Enable the Codecs that you want to use. Scroll down and click '''Update'''.
<br><br>


=Create Dial Peer=
=Create Dial Peer=


Create Dial Peer (Routing -> Dial Peers).
Go to '''Routing -> Dial Peers -> ADD NEW DIAL PEER'''.


Set '.*' (without quotes) for 'Destination regexp' and 'Source regexp'
<br><br>
This will allow any CallerID to any Destination.
[[File:Add New Dial Peer.png|1000px]]
<br><br>
Set '.*' (without quotes) for '''Source''' and '''Destination''' regexp. This will allow any CallerID to dial any Destination.
<br><br>
[[File:Source and Destination regexp with name.png|1000px]]
<br><br>
Click the '''List''' icon, select your '''Termination Point''' from the dropdown menu and click '''ASSIGN'''.
<br><br>
[[File:List Icon.png|1000px]]
<br><br>
[[File:Assign termination point.png|1000px]]
<br><br>
 
=Create a Routing Group=


Assign Termination Point to the Dial Peer (Routing -> Dial Peers -> TP list icon)
Go to '''Routing -> Routing Groups -> ADD NEW ROUTING GROUP''' and fill in the details.


Create a Routing Group (Routing -> Routing Groups).
Click the '''DP LIST -> ASSIGN DIAL PEER''', select your Dial Peer from the dropdown menu and click '''ASSIGN'''.
Assign Dial Peer to Routing Group. (icon Routing -> Routing Groups -> Dial Peers)


You'll get a confirmation '''DIAL PEER SUCCESSFULLY ASSIGNED'''.
<br><br>


=Create Originator=
=Create Originator=


Create a User that will be your Customer (will buy traffic from you).
Originator is your Client (Customer). Go to '''USERS''' and click [[file:icon add.png]]'''Add new'''.


Set min/max balance for this User (example -10, 0).
The steps are similar to creating Terminator:
* Create a '''Username''' and select "Suggest strong password"
* Set the '''Balance range''', for example, MIN: -1000, MAX 0. MAX refers to the credit limit that you give to your postpaid Customer. MAX is not relevant here, unless you have a bilateral interconnection agreement with your Customer and they can be your Customer AND Supplier. If you have a bilateral interconnection agreement, then you can set MAX: 1000 which means that they give such a credit limit.
* Scroll down and click '''Create'''. You'll see a message "USER SUCCESSFULLY CREATED".
<br><br>
=Create Origination Point=


Create a Device for the Customer and mark it as 'Act as Origination Point', mark it '''Active''', set '''Routing Algorithm''', '''Routing Group''' and '''Tariff''' for it. Set '.*' (without quotes) in '''Source (CallerID) Allow''' field.  
The steps are similar to creating Termination Point, just this time choose '''YES''' in '''Act as Origination Point''' field.


The device should be IP Auth. Enter the proper IP for this Device (from where the call will come)
Select '''Automatically create Routing Group for this OP''' to make the further process faster, unless you prefer creating a Routing Group manually.


Assign proper Routing Group and Tariff for the Origination Point.
You'll see more options in Authentication settings.


You can choose '''Static IP''' and add some Tech. Prefix or '''Dynamic IP''' if you prefer Username/Password Authentication.
Enable the Codecs that you want to use.
Select the tariff (your '''Sell Tariff''') in the '''Origination Point Tariff''' settings.
Scroll down and click '''Update'''.
If you chose '''Automatically create Routing Group for this OP''', a Routing Group was created automatically.
Then follow the same process to assign your Dial Peer to Routing Group.
<br><br>


=Make a Call=
=Make a Call=


Try to use the [[M4 Call Tracing]] feature before making a real call.
Call Tracing works by making fake calls in real-time so the result may be different every time.
M4 will not try to ring any Terminators during Call Tracing.
If Call Tracing is successful, you can make a call from a [[Softphones and Mobile dialers|SIP softphone]] or another SIP device.
If you choose the Ekiga softphone, please follow this guide: [[M4 Make a call with Ekiga softphone]].


<br><br>
Enter a phone number in international (E.164) format into your softphone and try to dial.


=Configuration video=
For example, the UK mobile phone number '07911 123456' in international format is '44 7911 123456', where '44' is the country code.
[[Image:warning.png|15px]]'''IMPORTANT!''' This video is not up to date.
<br><br>
<html>
<iframe width="640" height="360" src="https://www.youtube.com/embed/En6i-6docOc" frameborder="0"></iframe>
</html>


After the call, you can check your call in the system.


Go to: '''REPORTS -> Calls List''' and you will see your call.


<br><br>
<br><br>


=See Also=
=See Also=
* [[M4 Tariffs|M4 Tariffs]]
* [[M4 Routing Logic]]
* [[M4 Rates|M4 Rates]]
* [[M4 Tariffs]]
* [[M4 Rates]]
* [[M4 Users]]
* [[M4 Connection Points]]
* [[M4 Dial Peers]]
* [[M4 Routing Groups]]
* [[M4 Make a call with Ekiga softphone]]
* [[M4 Make a call with Ekiga softphone]]

Latest revision as of 07:53, 20 March 2024

This small guide will show how to make your first call after system installation.

Before making configurations, please read the M4 Routing Logic to see the bigger picture.

Warning.pngIMPORTANT! The configuration will allow any CallerID to dial any Destination from the set IP. Adjust settings accordingly to suit your needs.

Create a Tariff

Read more about M4 Tariffs.

Tariffs are a set of Rates (prices) to different destinations.

Go to Billing > Tariffs and here you will see all tariffs grouped by Buy and Sell Tariffs:

  • Buy Tariff is your self-cost. Usually, you get the Buy Tariff from your Supplier in a CSV format.
  • Sell Tariff is a Tariff for your Users. It’s your Buy Tariff + your profit margin.


A Tariff consists of Rates (prices to a particular prefix).

To make a call, Supplier and User Tariffs must be created and Rates added at least for one prefix.

Go to Billing > Tariffs and click on ADD NEW TARIFF


M4 Add New Tariff.png

  • Choose a name, for example Test_Buy_Tariff
  • Select a currency from a dropdown menu
  • Select Terminator
  • Click on Create.


M4 New Tariff.png

After clicking on Create you'll see a message TARIFF SUCCESSFULLY CREATED.

M4 Tariff successfully created.png

Repeat the same process to create a Sell Tariff for your Clients.

Add Rates

Read more about M4 Rates.

You've just created a Tariff with 0 Rates. The next step is to add Rates. In this simplified guide, we'll add just one rate. Click on RATES (0).

If you want to upload a complete rate sheet, please follow this guide: Import Rates from CSV.



M4 Tariff with 0 Rates.png

Add a rate to your selected prefix/destination that you plan to dial and click on ADD RATE.

In this example, we'll use the prefix 44 that defines United Kingdom - Fixed.



M4 Add Rate.png

Repeat the same process to add rates to your Sell Tariff for your Clients. Just this time add a higher rate than your buying rate to make a profit.

Create Terminator

Read more about M4 Users.

Terminator is your Supplier (Provider). Go to USERS and click Icon add.pngAdd new.

M4 Users Add New.png

  • Create a Username and select "Suggest strong password"
  • Set the Balance range, for example, MIN: 0, MAX 1000. MAX refers to the credit limit that you have with your Supplier. MIN is not relevant here, unless you have a bilateral interconnection agreement with your Supplier and they can be your Client AND Supplier. If you have a bilateral interconnection agreement, then you can set MIN: -1000 which means that you give such a credit limit to them.
  • Scroll down and click Create. You'll see a message "USER SUCCESSFULLY CREATED".



M4 Create Terminator.png

Create Termination Point

Read more about M4 Connection Points.

Click the Connection Point icon and then the ADD NEW CONNECTION POINT button to create a new Connection Point for Terminator.

M4 Create Connection Point.png

Add New Connection Point.png

Fill in the details, choose YES in Act as Termination Point field and click Create.

Act as Termination Point.png

You'll get a confirmation CONNECTION POINT CREATED.

Next, fill in the details (you should get these details from your Supplier's interconnection form).

Enter the proper IP Address and Port in Authentication.

M4 Authentication.png

Set '.*' (without quotes) in Source (CallerID) Allow field. This will allow any CallerID to dial. Read more about M4 Regexp Examples.

Set Source (CallerID) Allow.png

Set the Tariff that you previously created for it. Read more about M4 Tariffs.

Set Tariff.png

Enable the Codecs that you want to use. Scroll down and click Update.

Create Dial Peer

Go to Routing -> Dial Peers -> ADD NEW DIAL PEER.



Add New Dial Peer.png

Set '.*' (without quotes) for Source and Destination regexp. This will allow any CallerID to dial any Destination.

Source and Destination regexp with name.png

Click the List icon, select your Termination Point from the dropdown menu and click ASSIGN.

List Icon.png

Assign termination point.png

Create a Routing Group

Go to Routing -> Routing Groups -> ADD NEW ROUTING GROUP and fill in the details.

Click the DP LIST -> ASSIGN DIAL PEER, select your Dial Peer from the dropdown menu and click ASSIGN.

You'll get a confirmation DIAL PEER SUCCESSFULLY ASSIGNED.

Create Originator

Originator is your Client (Customer). Go to USERS and click Icon add.pngAdd new.

The steps are similar to creating Terminator:

  • Create a Username and select "Suggest strong password"
  • Set the Balance range, for example, MIN: -1000, MAX 0. MAX refers to the credit limit that you give to your postpaid Customer. MAX is not relevant here, unless you have a bilateral interconnection agreement with your Customer and they can be your Customer AND Supplier. If you have a bilateral interconnection agreement, then you can set MAX: 1000 which means that they give such a credit limit.
  • Scroll down and click Create. You'll see a message "USER SUCCESSFULLY CREATED".



Create Origination Point

The steps are similar to creating Termination Point, just this time choose YES in Act as Origination Point field.

Select Automatically create Routing Group for this OP to make the further process faster, unless you prefer creating a Routing Group manually.

You'll see more options in Authentication settings.

You can choose Static IP and add some Tech. Prefix or Dynamic IP if you prefer Username/Password Authentication.

Enable the Codecs that you want to use.

Select the tariff (your Sell Tariff) in the Origination Point Tariff settings.

Scroll down and click Update.

If you chose Automatically create Routing Group for this OP, a Routing Group was created automatically.

Then follow the same process to assign your Dial Peer to Routing Group.



Make a Call

Try to use the M4 Call Tracing feature before making a real call.

Call Tracing works by making fake calls in real-time so the result may be different every time.

M4 will not try to ring any Terminators during Call Tracing.

If Call Tracing is successful, you can make a call from a SIP softphone or another SIP device.

If you choose the Ekiga softphone, please follow this guide: M4 Make a call with Ekiga softphone.

Enter a phone number in international (E.164) format into your softphone and try to dial.

For example, the UK mobile phone number '07911 123456' in international format is '44 7911 123456', where '44' is the country code.

After the call, you can check your call in the system.

Go to: REPORTS -> Calls List and you will see your call.



See Also