Linksys SPA942 Configuration

From Kolmisoft Wiki
Revision as of 09:42, 13 July 2010 by Mindaugas (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search
Spa942.jpg

First we need to know the IP address of the phone.

On the phone, press the Menu button:

Spa942 menu.jpg

Then press 9 and you should see:

2 Current IP
23.45.67.89 

This is just an example IP address! Yours will be different! Remember it or write it down.




Then open your internet browser on the computer which is connected to the same network as your SPA942 and in the address line, type:

http://23.45.67.89

ATTENTION! Change 23.45.67.89 to your IP address that you found earlier!

SPA942 Configuration should open.




Click on Admin Login and then on Advanced:


Spa942 conf1.png




Click on SIP and find the RTP Parameters section. Change the RTP Packet Size value to 0.020:


Spa942 conf2.png




Click on Regional, find the Miscellaneous section and change Time Zone to the appropriate one:


Spa942 conf3.png




OPTIONAL: If you experience low audio or your callee can't hear you properly, click on Phone and in the Audio Input Gain(dB) section, change fields values to 6:


Spa942 conf4.png




Click on Ext 1 and do the following:

  • In the General section, make sure the Line Enable field is Yes.
  • Under NAT Settings, the NAT Keep Alive Enable field should be Yes.
  • Proxy and Registration
    • Proxy - the value which provider gave you (an IP).
    • Register - Yes.
  • Subscriber Information
    • Display Name - value you got from your provider (username or login).
    • User ID - value you got from your provider (username or login) - same as Display Name.
    • Password - value you got from your provider (password or secret).


Spa942 conf5.png




Finally, click on Submit All Changes:


Spa942 conf6.png





Forward on second line

Call forward on second line is not working. Only 1st line: http://forums.whirlpool.net.au/forum-replies-archive.cfm/756453.html