Linksys SPA942 Configuration

From Kolmisoft Wiki
Revision as of 11:58, 17 January 2008 by Admin (talk | contribs)
Jump to navigationJump to search
Spa942.jpg

First we need to know what is the IP of the phone.

On phone press Menu button:

Spa942 menu.jpg

Then press 9 and you should see:

2 Current IP
23.45.67.89 

This is just example IP! Yours will be different! Remember it or write it down.




Then open your internet browser on computer which is connected in same network as your SPA942 and in address line type:

http://23.45.67.89

ATTENTION! Change 23.45.67.89 to your IP you find earlier!

SPA942 Configuration should open.




Press on Admin Login and then on Advanced:


Spa942 conf1.png




Press on SIP and find section RTP Parameters and change RTP Packet Size value to 0.020:


Spa942 conf2.png




Press on Regional and find section Miscellaneous and change Time Zone to appropriate one:


Spa942 conf3.png




OPTIONAL: If you experience low audio or your callee can't hear you good enough, press on Phone and in section Audio Input Gain(dB) change fields values to 6:


Spa942 conf4.png




Press on Ext 1 and:

  • In section General make sure field Line Enable is Yes.
  • NAT Settings, field NAT Keep Alive Enable - Yes
  • Proxy and Registration
    • Proxy - value which your provider gave to you (some IP)
    • Register - Yes
  • Subscriber Information
    • Display Name - value which you got from your provider (username or login)
    • User ID - value which you got from your provider (username or login) - same as in Display Name
    • Password - value which you got from your provider (password or secret)


Spa942 conf5.png




And finally press on Submit All Changes:


Spa942 conf6.png