Difference between revisions of "Linksys SPA942 Configuration"

From Kolmisoft Wiki
Jump to navigationJump to search
 
(8 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[Image:spa942.jpg|right]]
[[Image:spa942.jpg|right]]


First we need to know what is the IP of the phone.
First we need to know the IP address of the phone.


On phone press '''Menu''' button:
On the phone, press the '''Menu''' button:


[[Image:spa942_menu.jpg]]
[[Image:spa942_menu.jpg]]
Line 12: Line 12:
  23.45.67.89  
  23.45.67.89  


This is just example IP! Yours will be different! Remember it or write it down.
This is just an example IP address! Yours will be different! Remember it or write it down.


<br>
<br>
Line 18: Line 18:
<br>
<br>


Then open your internet browser on computer which is connected in same network as your SPA942 and in address line type:
Then open your internet browser on the computer which is connected to the same network as your SPA942 and in the address line, type:


  http://23.45.67.89
  http://23.45.67.89


ATTENTION! Change 23.45.67.89 to your IP you find earlier!
ATTENTION! Change 23.45.67.89 to your IP address that you found earlier!


SPA942 Configuration should open.
SPA942 Configuration should open.
Line 30: Line 30:
<br>
<br>


Press on '''Admin Login''' and then on '''Advanced''':
Click on '''Admin Login''' and then on '''Advanced''':
 


[[Image:spa942_conf1.png]]
[[Image:spa942_conf1.png]]
Line 38: Line 39:
<br>
<br>


Press on '''SIP''' and find section '''RTP Parameters''' and change '''RTP Packet Size''' value to '''0.020''':
Click on '''SIP''' and find the '''RTP Parameters''' section.  Change the '''RTP Packet Size''' value to '''0.020''':
 


[[Image:spa942_conf2.png]]
[[Image:spa942_conf2.png]]
Line 46: Line 48:
<br>
<br>


Press on '''Regional''' and find section '''Miscellaneous''' and change '''Time Zone''' to appropriate one:
Click on '''Regional''', find the '''Miscellaneous''' section and change '''Time Zone''' to the appropriate one:




Line 54: Line 56:
----
----
<br>
<br>
'''OPTIONAL''': If you experience low audio or your callee can't hear you properly, click on '''Phone''' and in the  '''Audio Input Gain(dB)''' section, change fields values to '''6''':
[[Image:spa942_conf4.png]]
<br>
----
<br>
Click on '''Ext 1''' and do the following:
* In the '''General''' section, make sure the '''Line Enable''' field is '''Yes'''.
* Under '''NAT Settings''', the '''NAT Keep Alive Enable''' field should be '''Yes'''.
* '''Proxy and Registration'''
** '''Proxy''' - the value which provider gave you (an IP).
** '''Register''' - '''Yes'''.
* '''Subscriber Information'''
** '''Display Name''' - value you got from your provider (username or login).
** '''User ID''' - value you got from your provider (username or login) - same as '''Display Name'''.
** '''Password''' - value you got from your provider (password or secret).
[[Image:spa942_conf5.png]]
<br>
----
<br>
Finally, click on '''Submit All Changes''':
[[Image:spa942_conf6.png]]
<br>
----
<br>
<br>
= Forward on second line =
Call forward on second line is not working. Only 1st line: http://forums.whirlpool.net.au/forum-replies-archive.cfm/756453.html

Latest revision as of 09:42, 13 July 2010

Spa942.jpg

First we need to know the IP address of the phone.

On the phone, press the Menu button:

Spa942 menu.jpg

Then press 9 and you should see:

2 Current IP
23.45.67.89 

This is just an example IP address! Yours will be different! Remember it or write it down.




Then open your internet browser on the computer which is connected to the same network as your SPA942 and in the address line, type:

http://23.45.67.89

ATTENTION! Change 23.45.67.89 to your IP address that you found earlier!

SPA942 Configuration should open.




Click on Admin Login and then on Advanced:


Spa942 conf1.png




Click on SIP and find the RTP Parameters section. Change the RTP Packet Size value to 0.020:


Spa942 conf2.png




Click on Regional, find the Miscellaneous section and change Time Zone to the appropriate one:


Spa942 conf3.png




OPTIONAL: If you experience low audio or your callee can't hear you properly, click on Phone and in the Audio Input Gain(dB) section, change fields values to 6:


Spa942 conf4.png




Click on Ext 1 and do the following:

  • In the General section, make sure the Line Enable field is Yes.
  • Under NAT Settings, the NAT Keep Alive Enable field should be Yes.
  • Proxy and Registration
    • Proxy - the value which provider gave you (an IP).
    • Register - Yes.
  • Subscriber Information
    • Display Name - value you got from your provider (username or login).
    • User ID - value you got from your provider (username or login) - same as Display Name.
    • Password - value you got from your provider (password or secret).


Spa942 conf5.png




Finally, click on Submit All Changes:


Spa942 conf6.png





Forward on second line

Call forward on second line is not working. Only 1st line: http://forums.whirlpool.net.au/forum-replies-archive.cfm/756453.html