Zoiper configuration

From Kolmisoft Wiki
Revision as of 10:46, 4 April 2018 by Gilbertas (talk | contribs)
Jump to navigationJump to search

In this guide, we will configure Zoiper softphone with server IP 192.168.0.108, username 1037, password a8q4nBG96VdD.

For your installation, use the correct server IP, username and password.

The ones in this example are only for the DEMO!



After downloading Zoiper, install and start it.

In Zoiper window click on Settings and then Preferences

Zoiper config1.png


New window will appear, click on Create account:

Zoiper config2.png


Select SIP account and Press NEXT to create a new SIP account:

Zoiper config3.png


Enter a user, password, and your MOR IP address or domain name. In our example we are using 192.168.0.108, username 1037, password a8q4nBG96VdD. Make sure your are entering your MOR IP and correct username/password.

Zoiper config4.png


New window will appear, where you can set account name, by default it will be username@IP. You can leave as it is or set some other name. Click NEXT to finish configuration.

Zoiper config5.png


Now you should see window with all information in one place. Zoiper will try to register and if successful will show as Registered in top corner. If status remain in Registering state, doublecheck entered details and click Register. Once state will show Registered, press OK.

Zoiper config6.png


Enter the number you wish to dial and click the CALL icon to dial:

Zoiper config7.png