Softswitch performance

From Kolmisoft Wiki
Jump to navigationJump to search

It is important to note that simultaneous calls depends only on hardware you are using.

2008.03.01 1575 simultaneous calls (2049 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • ~15% calls with transcoding (~85% calls no transcoding)
  • CPU busy 83% (17% idle)
  • Comments:
    • why channels/2 != calls?
    • because not all of them was connected
    • and when the system is loaded the channels stats update slow
    • in that day we got to almost 3500 cc
    • when you have a lot of invites, the system get very slow
    • we got to 220 setup calls per second
    • and the system was very havy
    • in that load, your app was very good, however mysql become the bottlenack
    • so i had to tweak it a little bit, but we already talked about it.
    • with your app, from the time we installed, we already did more then 30M minutes.
    • this setup can handle around 4k cc easly with no high rate cs per second

Asterisk1575.png



2008.02.18 906 simultaneous calls (1801 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • ~15% calls with transcoding (~85% calls no transcoding)
  • CPU busy 58% (42% idle)

Asterisk906.jpg Top906.jpg



2008.05.10 834 simultaneous calls

uname -a
Linux cl-t041-080cl 2.6.18-6-686-bigmem #1 SMP Sun Feb 10 22:21:07 UTC 2008 i686 GNU/Linux
cat /proc/cpuinfo
8 x Intel(R) Xeon(R) CPU           E5405  @ 2.00GHz
cpu MHz         : 2000.190
cache size      : 6144 KB

834calls.png




2008.01.17 637 simultaneous calls (1274 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • no transcoding
  • CPU busy 10% (90% idle)



2008.01.17 608 simultaneous calls (1215 channels)

  • 2 x Quad-Core Xeon 5300 "clovertown"
  • 4 Gb RAM
  • Debian 4.0
  • 2.6.18-5-amd64 #1 SMP Tue Oct 2 20:37:02 UTC 2007 x86_64 GNU/Linux
  • Asterisk 1.4.15
  • canreinvite=no*
  • CPU busy 6.7% (93.3% idle) no transcoding
  • CPU 30-35% with transcoding

608calls.png




  • canreinvite=yes means that voice traffic goes from client to provider directly bypassing MOR system