Sip show peers does not show devices

From Kolmisoft Wiki
Revision as of 15:56, 2 October 2009 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

MOR uses Asterisk Realtime, so sip show peers behaves slightly different compared to config-files Asterisk usage.

sip show peers command shows devices only AFTER they are registered into Asterisk.

main*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status     Realtime
0 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 0 offline]
main*CLI>
main*CLI>
   -- Registered SIP '101' at 213.16.10.78 port 64209 expires 1800
   -- Saved useragent "X-PRO build 1082" for peer 101
[Oct  2 18:48:06] NOTICE[2130]: chan_sip.c:12532 handle_response_peerpoke: Peer '101' is now Reachable. (98ms / 2000ms)
main*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status     Realtime
101/101                    213.16.10.78  D   N   A  64209    OK (98 ms)
1 sip peers [Monitored: 1 online, 0 offline Unmonitored: 0 online, 0 offline]

In this example sip show peers command was executed when device is not registered:

main*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status     Realtime
0 sip peers [Monitored: 0 online, 0 offline Unmonitored: 0 online, 0 offline]

After that device is registered:

   -- Registered SIP '101' at 213.16.10.78 port 64209 expires 1800
   -- Saved useragent "X-PRO build 1082" for peer 101
[Oct  2 18:48:06] NOTICE[2130]: chan_sip.c:12532 handle_response_peerpoke: Peer '101' is now Reachable. (98ms / 2000ms)

Executing sip show peers shows registered device:

main*CLI> sip show peers
Name/username              Host            Dyn Nat ACL Port     Status     Realtime
101/101                    213.16.10.78  D   N   A  64209    OK (98 ms)
1 sip peers [Monitored: 1 online, 0 offline Unmonitored: 0 online, 0 offline]