Difference between revisions of "Setting up https secure connection"

From Kolmisoft Wiki
Jump to navigationJump to search
 
(42 intermediate revisions by 5 users not shown)
Line 1: Line 1:
= Installing SSL =
= Installing SSL =
For an SSL encrypted web server you will need a few things. Depending on your install you may or may not have OpenSSL and mod_ssl, Apache's interface to OpenSSL.
In new MOR (starting from X14) and M2 installs, SSL with self-signed certificate is preconfigured (using external sever IP).
If you have older MOR and M2 installations, and SSL was not configured previously, you can configure self-signed certificate in MOR/M2 by running the following script. Script is tested and ready to use:


  yum -y install mod_ssl openssl
For MOR:
  svn update /usr/src/mor
/usr/src/mor/MOR_version/gui/ssl_install.sh


Generate private key
For M2:
  openssl genrsa -out ca.key 2048
  svn update /usr/src/m2
/usr/src/m2/gui/ssl_install.sh


Generate CSR
openssl req -new -key ca.key -out ca.csr


Generate Self Signed Key
And restart httpd service
openssl x509 -req -days 365 -in ca.csr -signkey ca.key -out ca.crt
  service httpd restart
 
Move the files to the correct locations
mv ca.crt /etc/pki/tls/certs
  mv ca.key /etc/pki/tls/private/ca.key
mv ca.csr /etc/pki/tls/private/ca.csr
 
Then we need to update the Apache SSL configuration file ( /etc/httpd/conf.d/ssl.conf ). Change the paths to match where the Key file is stored. If you've used the method above it will be.
 
SSLCertificateFile /etc/pki/tls/certs/ca.crt 


Then set the correct path for the Certificate Key File a few lines below. If you've followed the instructions above it is:
Clear browser cache before testing redirect. Otherwise it might not work.
SSLCertificateKeyFile /etc/pki/tls/private/ca.key 
 
Quit and save the file and then restart Apache
/etc/init.d/httpd restart
 
Source: http://shapeshed.com/journal/setting_up_mod_ssl_on_apache_centos_52/
 
Troubleshooting:
 
If you cannot access GUI, try following commands:
chown apache.apache /var/log/httpd
service httpd restart


== Allow only https ==
== Allow only https ==
If you would like your users to be automatically redirected to secure connection (https), add the line to /etc/httpd/conf.d/mor.conf so it would look like:
If you would like your users to be automatically redirected to secure connection (https), add the line to /etc/httpd/conf.d/m2.conf so it would look like:


  <VirtualHost *:80>
  <VirtualHost *:80>
Line 51: Line 32:
   Redirect permanent / https://www.example.com/    #Add this one. Put your hostname instead of www.example.com
   Redirect permanent / https://www.example.com/    #Add this one. Put your hostname instead of www.example.com
  </VirtualHost>
  </VirtualHost>
And restart httpd service
service httpd restart
Also change from http to https in cron actions:
  sed -i 's#http:#https:#'  /etc/cron.d/*actions
  service crond restart


<br><br>
<br><br>


== Important notes ==
== Configure Domain Name ==
* When you disable http access and allow https only - please make sure that you change URL in various crontabs used by mor and located in /etc/cron.d/*
 
<br><br>
If you have domain name, replace IP_ADDRESS (which will be your external IP address) with your domain name and regenerate certification files with new information with command bellow:
  openssl req -new -newkey rsa:4096 -days 365 -nodes  -x509  -keyout /etc/httpd/ssl/apache.key -out  /etc/httpd/ssl/apache.crt
Enter information as requested, in common name section please enter your domain name.
 
And restart httpd service
service httpd restart
 
 
== Cron Actions ==
If SSL redirection is enabled, ensure that hourly actions are able to access GUI internally:
 
wget http://127.0.0.1/billing/callc/hourly_actions
 
if it does not work, adjust domain or add --no-check-certificate like this:
 
wget --no-check-certificate http://127.0.0.1/billing/callc/hourly_actions
 
For https connection use:
 
wget https://127.0.0.1/billing/callc/hourly_actions
 
Or:
 
wget --no-check-certificate https://127.0.0.1/billing/callc/hourly_actions
 
Once command works, make same adjustments on /etc/cron.d/mor_hourly_actions, mor_daily_actions and mor_monthly_actions.
 
'''!!!DO NOT TEST RUN daily AND monthly ACTIONS MANUALLY!!!''' just adjust cron files, save then and restart crond service.
 
== Connection is not private Notification ==
 
When using self-signed certificate, you will get notification that your connection is not private.
 
[[File:Privacy1.png]]
 
To fix this, press '''Advanced''' and after - '''Proceed'''. You will see this message only once from same Browser/Computer.
To avoid this message, you can buy certificates from SSL Providers.
 
== Using your own certificates ==


Configuration may vary depending on SSL provider. As always, make backup of files before editing them, so you would be able to revert in case of failure.


== ERROR: When directory structure is visible ==
If you want to use SSL Provider's certificates, you have to update self-signed configuration which should be already installed in your server.


That means incorrect configuration in /etc/httpd/conf.d/ssl.conf
Place certificate files somewhere in filesystem and update following lines in /etc/httpd/conf.d/ssl.conf with location of certificate files:


Make sure your file looks like this:
SSLCertificateFile /etc/httpd/ssl/apache.crt
SSLCertificateKeyFile /etc/httpd/ssl/apache.key
SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt


<pre>
in same file, uncomment this line and set your domain:
#
# This is the Apache server configuration file providing SSL support.
# It contains the configuration directives to instruct the server how to
# serve pages over an https connection. For detailing information about these
# directives see <URL:http://httpd.apache.org/docs/2.2/mod/mod_ssl.html>
#
# Do NOT simply read the instructions in here without understanding
# what they do.  They're here only as hints or reminders.  If you are unsure
# consult the online docs. You have been warned.
#
   
   
LoadModule ssl_module modules/mod_ssl.so
ServerName www.example.com:443
 
save changes.
 
Set your domain instead of IP address in /etc/httpd/conf.d/mor_ssl.conf
   
   
#
ServerName 1.2.3.4
# When we also provide SSL we have to listen to the
 
# the HTTPS port in addition.
save changes.
#
 
Listen 443
Restart apache to apply changes:
 
service httpd restart
 
Check cron actions as described above.
 
== Hardening SSL security ==
By default, old SSL/TLS protocols versions and ciphers are enabled which can cause security threats. To disable them, open /etc/httpd/conf.d/ssl.conf, find lines which starts with the following keywords - SSLProtocol, SSLCipherSuite. Comment them out and add following lines:
 
SSLProtocol all -SSLv2 -SSLv3 -TLSv1
SSLCipherSuite HIGH:!aNULL:!MD5:!3DES
SSLHonorCipherOrder on
 
Configuration with commented lines should look like this:
#   SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect. Disable SSLv2 access by default:
#SSLProtocol all -SSLv2
SSLProtocol all -SSLv2 -SSLv3 -TLSv1
   
   
##
  #  SSL Cipher Suite:
##  SSL Global Context
# List the ciphers that the client is permitted to negotiate.
##
# See the mod_ssl documentation for a complete list.
##  All SSL configuration in this context applies both to
#SSLCipherSuite DEFAULT:!EXP:!SSLv2:!DES:!IDEA:!SEED:+3DES
##  the main server and all SSL-enabled virtual hosts.
  SSLCipherSuite HIGH:!aNULL:!MD5:!3DES
##
  SSLHonorCipherOrder on
 
#  Pass Phrase Dialog:
Restart httpd:
#  Configure the pass phrase gathering process.
  service httpd restart
#  The filtering dialog program (`builtin' is a internal
 
#  terminal dialog) has to provide the pass phrase on stdout.
If after this you having problems connecting, uncoment old values, comment new ones, and restart httpd again
SSLPassPhraseDialog  builtin
#  Inter-Process Session Cache:
#  Configure the SSL Session Cache: First the mechanism
#  to use and second the expiring timeout (in seconds).
SSLSessionCache        shmcb:/var/cache/mod_ssl/scache(512000)
SSLSessionCacheTimeout  300
#  Semaphore:
#  Configure the path to the mutual exclusion semaphore the
#  SSL engine uses internally for inter-process synchronization.
SSLMutex default
#  Pseudo Random Number Generator (PRNG):
#  Configure one or more sources to seed the PRNG of the
#  SSL library. The seed data should be of good random quality.
#  WARNING! On some platforms /dev/random blocks if not enough entropy
#  is available. This means you then cannot use the /dev/random device
#  because it would lead to very long connection times (as long as
#  it requires to make more entropy available). But usually those
#  platforms additionally provide a /dev/urandom device which doesn't
#  block. So, if available, use this one instead. Read the mod_ssl User
#  Manual for more details.
SSLRandomSeed startup file:/dev/urandom  256
SSLRandomSeed connect builtin
#SSLRandomSeed startup file:/dev/random  512
#SSLRandomSeed connect file:/dev/random  512
#SSLRandomSeed connect file:/dev/urandom 512
#
# Use "SSLCryptoDevice" to enable any supported hardware
# accelerators. Use "openssl engine -v" to list supported
# engine names.  NOTE: If you enable an accelerator and the
# server does not start, consult the error logs and ensure
# your accelerator is functioning properly.
#
SSLCryptoDevice builtin
#SSLCryptoDevice ubsec
##
## SSL Virtual Host Context
##
<VirtualHost _default_:443>
# General setup for the virtual host, inherited from global configuration
DocumentRoot "/var/www/html/billing"                                          #ADD THIS
#ServerName www.example.com:443
# Use separate log files for the SSL virtual host; note that LogLevel
# is not inherited from httpd.conf.
ErrorLog logs/ssl_error_log
TransferLog logs/ssl_access_log
LogLevel warn
#  SSL Engine Switch:
#  Enable/Disable SSL for this virtual host.
SSLEngine on
#  SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect.  Disable SSLv2 access by default:
SSLProtocol all -SSLv2
   
#  SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
SSLCipherSuite ALL:!ADH:!EXPORT:!SSLv2:RC4+RSA:+HIGH:+MEDIUM:+LOW
   
#  Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate.  If
# the certificate is encrypted, then you will be prompted for a
# pass phrase.  Note that a kill -HUP will prompt again.  A new
# certificate can be generated using the genkey(1) command.
SSLCertificateFile /etc/pki/tls/certs/ca.crt
#  Server Private Key:
#  If the key is not combined with the certificate, use this
#  directive to point at the key file.  Keep in mind that if
#  you've both a RSA and a DSA private key you can configure
#  both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/pki/tls/private/ca.key
#  Server Certificate Chain:
#  Point SSLCertificateChainFile at a file containing the
#  concatenation of PEM encoded CA certificates which form the
#  certificate chain for the server certificate. Alternatively
#  the referenced file can be the same as SSLCertificateFile
#  when the CA certificates are directly appended to the server
#  certificate for convinience.
#SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt
   
#  Certificate Authority (CA):
#  Set the CA certificate verification path where to find CA
#  certificates for client authentication or alternatively one
#  huge file containing all of them (file must be PEM encoded)
#SSLCACertificateFile /etc/pki/tls/certs/ca-bundle.crt
#  Client Authentication (Type):
#  Client certificate verification type and depth.  Types are
#  none, optional, require and optional_no_ca.  Depth is a
#  number which specifies how deeply to verify the certificate
#  issuer chain before deciding the certificate is not valid.
#SSLVerifyClient require
#SSLVerifyDepth  10
#  Access Control:
#  With SSLRequire you can do per-directory access control based
on arbitrary complex boolean expressions containing server
#  variable checks and other lookup directives.  The syntax is a
#  mixture between C and Perl.  See the mod_ssl documentation
#  for more details.
#<Location />
#SSLRequire (    %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \
#            and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \
#            and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \
#            and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \
#            and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20      ) \
#          or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/
#</Location>
#  SSL Engine Options:
#  Set various options for the SSL engine.
#  o FakeBasicAuth:
#    Translate the client X.509 into a Basic Authorisation. This means that
#    the standard Auth/DBMAuth methods can be used for access control.  The
#    user name is the `one line' version of the client's X.509 certificate.
#    Note that no password is obtained from the user. Every entry in the user
#    file needs this password: `xxj31ZMTZzkVA'.
#  o ExportCertData:
#    This exports two additional environment variables: SSL_CLIENT_CERT and
#    SSL_SERVER_CERT. These contain the PEM-encoded certificates of the
#    server (always existing) and the client (only existing when client
#    authentication is used). This can be used to import the certificates
#    into CGI scripts.
#  o StdEnvVars:
#    This exports the standard SSL/TLS related `SSL_*' environment variables.
#    Per default this exportation is switched off for performance reasons,
#    because the extraction step is an expensive operation and is usually
#    useless for serving static content. So one usually enables the
#    exportation for CGI and SSI requests only.
#  o StrictRequire:
#    This denies access when "SSLRequireSSL" or "SSLRequire" applied even
#    under a "Satisfy any" situation, i.e. when it applies access is denied
#    and no other module can change it.
#  o OptRenegotiate:
#    This enables optimized SSL connection renegotiation handling when SSL
#    directives are used in per-directory context.
#SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire
<Files ~ "\.(cgi|shtml|phtml|php3?)$">
    SSLOptions +StdEnvVars
</Files>
<Directory "/var/www/cgi-bin">
    SSLOptions +StdEnvVars
</Directory>
#  SSL Protocol Adjustments:
#  The safe and default but still SSL/TLS standard compliant shutdown
#  approach is that mod_ssl sends the close notify alert but doesn't wait for
#  the close notify alert from client. When you need a different shutdown
#  approach you can use one of the following variables:
#  o ssl-unclean-shutdown:
#    This forces an unclean shutdown when the connection is closed, i.e. no
#    SSL close notify alert is send or allowed to received.  This violates
#    the SSL/TLS standard but is needed for some brain-dead browsers. Use
#    this when you receive I/O errors because of the standard approach where
#    mod_ssl sends the close notify alert.
#  o ssl-accurate-shutdown:
#    This forces an accurate shutdown when the connection is closed, i.e. a
#    SSL close notify alert is send and mod_ssl waits for the close notify
#    alert of the client. This is 100% SSL/TLS standard compliant, but in
#    practice often causes hanging connections with brain-dead browsers. Use
#    this only for browsers where you know that their SSL implementation
#    works correctly.
#  Notice: Most problems of broken clients are also related to the HTTP
#  keep-alive facility, so you usually additionally want to disable
#  keep-alive for those clients, too. Use variable "nokeepalive" for this.
#  Similarly, one has to force some clients to use HTTP/1.0 to workaround
#  their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and
#  "force-response-1.0" for this.
SetEnvIf User-Agent ".*MSIE.*" \
        nokeepalive ssl-unclean-shutdown \
        downgrade-1.0 force-response-1.0
#  Per-Server Logging:
#  The home of a custom SSL log file. Use this when you want a
#  compact non-error SSL logfile on a virtual host basis.
CustomLog logs/ssl_request_log \
          "%t %h %{SSL_PROTOCOL}x %{SSL_CIPHER}x \"%r\" %b"
DocumentRoot /var/www/html                                                #ADD THIS
<Directory /var/www/html>                                                #ADD THIS
    Allow from all                                                        #ADD THIS
</Directory>                                                              #ADD THIS
RailsBaseURI /billing                                                    #ADD THIS
<Directory /var/www/html/billing>                                        #ADD THIS
    Options -MultiViews                                                  #ADD THIS
</Directory>                                                              #ADD THIS
ServerName my.domain.com                                                  #ADD THIS
RedirectMatch permanent ^/$ https://my.domain.com/billing/callc/login    #ADD THIS change my.domain.com to proper domain
</VirtualHost>


</pre>
== SSL for Resellers domain ==


If you are implementing SSL into MOR please remove m2.conf file
Generate certificates for Reseller domain.


rm -rf /etc/httpd/conf.d/m2.conf
In the bottom of /etc/httpd/conf.d/ssl.conf add:
<VirtualHost *:443>
SSLEngine on
SSLCertificateFile /path/to/resellerdomain.com.crt
SSLCertificateChainFile /path/to/resellerdomain.com.ca-bundle
SSLCertificateKeyFile /path/to/resellerdomain.com.key
ServerName resellerdomain.com
DocumentRoot /var/www/html/
</VirtualHost>


Restart Apache after changing this file.
Create the file /etc/httpd/conf.d/resellerdomain_com.conf (note underscore; don't use dots in filename) with following content:
<VirtualHost *:80>
  DocumentRoot /var/www/html
  <Directory /var/www/html>
  Allow from all
  </Directory>
  RailsBaseURI /billing
  <Directory /var/www/html/billing>
  Options -MultiViews
  </Directory>
  RailsEnv production
  ServerName resellerdomain.com
  RedirectMatch permanent ^/$ https://resellerdomain.com/billing/callc/login/8rK6IG2lVf
</VirtualHost

Latest revision as of 10:34, 25 May 2022

Installing SSL

In new MOR (starting from X14) and M2 installs, SSL with self-signed certificate is preconfigured (using external sever IP). If you have older MOR and M2 installations, and SSL was not configured previously, you can configure self-signed certificate in MOR/M2 by running the following script. Script is tested and ready to use:

For MOR:

svn update /usr/src/mor
/usr/src/mor/MOR_version/gui/ssl_install.sh 

For M2:

svn update /usr/src/m2
/usr/src/m2/gui/ssl_install.sh 


And restart httpd service

service httpd restart

Clear browser cache before testing redirect. Otherwise it might not work.

Allow only https

If you would like your users to be automatically redirected to secure connection (https), add the line to /etc/httpd/conf.d/m2.conf so it would look like:

<VirtualHost *:80>
 DocumentRoot /var/www/html
 <Directory /var/www/html>
  Allow from all
 </Directory>
 RailsBaseURI /billing
 <Directory /var/www/html/billing>
  Options -MultiViews
 </Directory>
 RailsEnv production
 Redirect permanent / https://www.example.com/     #Add this one. Put your hostname instead of www.example.com
</VirtualHost>

And restart httpd service

service httpd restart

Also change from http to https in cron actions:

 sed -i 's#http:#https:#'  /etc/cron.d/*actions
 service crond restart




Configure Domain Name

If you have domain name, replace IP_ADDRESS (which will be your external IP address) with your domain name and regenerate certification files with new information with command bellow:

 openssl req -new -newkey rsa:4096 -days 365 -nodes  -x509   -keyout /etc/httpd/ssl/apache.key -out  /etc/httpd/ssl/apache.crt

Enter information as requested, in common name section please enter your domain name.

And restart httpd service

service httpd restart


Cron Actions

If SSL redirection is enabled, ensure that hourly actions are able to access GUI internally:

wget http://127.0.0.1/billing/callc/hourly_actions

if it does not work, adjust domain or add --no-check-certificate like this:

wget --no-check-certificate http://127.0.0.1/billing/callc/hourly_actions

For https connection use:

wget https://127.0.0.1/billing/callc/hourly_actions

Or:

wget --no-check-certificate https://127.0.0.1/billing/callc/hourly_actions

Once command works, make same adjustments on /etc/cron.d/mor_hourly_actions, mor_daily_actions and mor_monthly_actions.

!!!DO NOT TEST RUN daily AND monthly ACTIONS MANUALLY!!! just adjust cron files, save then and restart crond service.

Connection is not private Notification

When using self-signed certificate, you will get notification that your connection is not private.

Privacy1.png

To fix this, press Advanced and after - Proceed. You will see this message only once from same Browser/Computer. To avoid this message, you can buy certificates from SSL Providers.

Using your own certificates

Configuration may vary depending on SSL provider. As always, make backup of files before editing them, so you would be able to revert in case of failure.

If you want to use SSL Provider's certificates, you have to update self-signed configuration which should be already installed in your server.

Place certificate files somewhere in filesystem and update following lines in /etc/httpd/conf.d/ssl.conf with location of certificate files:

SSLCertificateFile /etc/httpd/ssl/apache.crt
SSLCertificateKeyFile /etc/httpd/ssl/apache.key
SSLCertificateChainFile /etc/pki/tls/certs/server-chain.crt

in same file, uncomment this line and set your domain:

ServerName www.example.com:443

save changes.

Set your domain instead of IP address in /etc/httpd/conf.d/mor_ssl.conf

ServerName 1.2.3.4

save changes.

Restart apache to apply changes:

service httpd restart

Check cron actions as described above.

Hardening SSL security

By default, old SSL/TLS protocols versions and ciphers are enabled which can cause security threats. To disable them, open /etc/httpd/conf.d/ssl.conf, find lines which starts with the following keywords - SSLProtocol, SSLCipherSuite. Comment them out and add following lines:

SSLProtocol all -SSLv2 -SSLv3 -TLSv1 
SSLCipherSuite HIGH:!aNULL:!MD5:!3DES
SSLHonorCipherOrder on

Configuration with commented lines should look like this:

#   SSL Protocol support:
# List the enable protocol levels with which clients will be able to
# connect.  Disable SSLv2 access by default:
#SSLProtocol all -SSLv2
SSLProtocol all -SSLv2 -SSLv3 -TLSv1 

#   SSL Cipher Suite:
# List the ciphers that the client is permitted to negotiate.
# See the mod_ssl documentation for a complete list.
#SSLCipherSuite DEFAULT:!EXP:!SSLv2:!DES:!IDEA:!SEED:+3DES
SSLCipherSuite HIGH:!aNULL:!MD5:!3DES
SSLHonorCipherOrder on

Restart httpd:

service httpd restart

If after this you having problems connecting, uncoment old values, comment new ones, and restart httpd again

SSL for Resellers domain

Generate certificates for Reseller domain.

In the bottom of /etc/httpd/conf.d/ssl.conf add:

<VirtualHost *:443>
SSLEngine on
SSLCertificateFile /path/to/resellerdomain.com.crt
SSLCertificateChainFile /path/to/resellerdomain.com.ca-bundle
SSLCertificateKeyFile /path/to/resellerdomain.com.key

ServerName resellerdomain.com

DocumentRoot /var/www/html/
</VirtualHost>

Create the file /etc/httpd/conf.d/resellerdomain_com.conf (note underscore; don't use dots in filename) with following content:

<VirtualHost *:80>
 DocumentRoot /var/www/html
 <Directory /var/www/html>
  Allow from all
 </Directory>
 RailsBaseURI /billing
 <Directory /var/www/html/billing>
  Options -MultiViews
 </Directory>
 RailsEnv production
 ServerName resellerdomain.com
 RedirectMatch permanent ^/$ https://resellerdomain.com/billing/callc/login/8rK6IG2lVf
</VirtualHost