Difference between revisions of "MOR and Trixbox"

From Kolmisoft Wiki
Jump to navigationJump to search
Line 60: Line 60:


First let's create user for phone:
First let's create user for phone:
[[Image:trixbox6.png]]

Revision as of 20:31, 18 December 2007

As MOR and Trixbox (FreePBX) both use Asterisk Realtime and custom extensions - they can't work nicely on the same server.

In order to integrate Trixbox with MOR you need to connect in following way:


Trixbox small.png


Connection diagram

As an example we will configure one phone dialing. Phone is connected to Trixbox which is connected to MOR:


Trixbox2 small.png


Here for simplicity all devices are in same LAN:

  • MOR server has IP: 10.10.1.10
  • Trixbox: 10.10.1.20
  • Phone: 10.10.1.30

MOR and Trixbox are connected with following settings:

  • username: mor_trixbox
  • password: mor_trixbox_psw

And phone to Trixbox is connected with:

  • username: 201
  • password: 201psw


MOR configuration for Trixbox

We need to create connection between MOR and Trixbox. In this example we will configure MOR using SIP.

We need to create user for Trixbox - pbx_user, put any details for it - it does not matter:

Trixbox3.png

Now we need to configure device for Trixbox:

Trixbox4.png

Main settings are:

Trixbox5.png

  • Mark this device as Trunk with ANI support
  • Username (by example): mor_trixbox
  • Password: mor_trixbox_psw
  • Host: 10.10.1.20
  • Make sure Dynamic? is unchecked and port is 5060 (for SIP)


MOR configuration for phone

To correctly bill phone calls you need to create separate user and device for it on MOR.

First let's create user for phone:

Trixbox6.png