Difference between revisions of "MOR and Trixbox"
| Line 59: | Line 59: | ||
To correctly bill phone calls you need to create separate user and device for it on MOR. | To correctly bill phone calls you need to create separate user and device for it on MOR. | ||
First let's create user for phone: | First let's create user for phone (phone_user): | ||
[[Image:trixbox6.png]] | [[Image:trixbox6.png]] | ||
Revision as of 20:31, 18 December 2007
As MOR and Trixbox (FreePBX) both use Asterisk Realtime and custom extensions - they can't work nicely on the same server.
In order to integrate Trixbox with MOR you need to connect in following way:
Connection diagram
As an example we will configure one phone dialing. Phone is connected to Trixbox which is connected to MOR:
Here for simplicity all devices are in same LAN:
- MOR server has IP: 10.10.1.10
- Trixbox: 10.10.1.20
- Phone: 10.10.1.30
MOR and Trixbox are connected with following settings:
- username: mor_trixbox
- password: mor_trixbox_psw
And phone to Trixbox is connected with:
- username: 201
- password: 201psw
MOR configuration for Trixbox
We need to create connection between MOR and Trixbox. In this example we will configure MOR using SIP.
We need to create user for Trixbox - pbx_user, put any details for it - it does not matter:
Now we need to configure device for Trixbox:
Main settings are:
- Mark this device as Trunk with ANI support
- Username (by example): mor_trixbox
- Password: mor_trixbox_psw
- Host: 10.10.1.20
- Make sure Dynamic? is unchecked and port is 5060 (for SIP)
MOR configuration for phone
To correctly bill phone calls you need to create separate user and device for it on MOR.
First let's create user for phone (phone_user):
