MOR API device details get

Description

MOR API Device details get

Usage

• From MOR X5 call: /api/device_details_get
• Methods: POST, GET(if allowed, not recomended)

Parametres

• u – username for authentication. Required.
• device_id – id of the device which details you want to get.
• hash – SHA1 hash constructed using device_id and API_Secret_Key ( More described in Constructing hash). Required.

Please note that admin/reseller can retrieve Device details just for their own Users. Simple users cannot check device details.

Request

We have API Secret Key = 456789, device_id = 5

We send:

HTML POST: http://<SERVER_IP>/billing/api/device_details_get?u=admin&device_id=5&hash=65fd575c441513bd114b84c7dbdb01e0f2716d27

* Note that username is not included in hash

Returns

Success

<page>
 <name>101  </name>
 <host>dynamic  </host>
 <secret>vauvszef  </secret>
 <context>mor_local  </context>
 <ipaddr>0.0.0.0  </ipaddr>
 <port>0  </port>
 <regseconds>1175892667  </regseconds>
 <accountcode>2  </accountcode>

<callerid>"101" <101> </callerid><extension>101 </extension><voicemail_active>0 </voicemail_active><username>101 </username><device_type>IAX2 </device_type><works_not_logged>1 </works_not_logged><forward_to>0 </forward_to><record>0 </record><transfer>no </transfer><disallow>all </disallow><allow>all </allow><deny>0.0.0.0/0.0.0.0 </deny><permit>0.0.0.0/0.0.0.0 </permit><nat>yes </nat><qualify>500 </qualify><fullcontact> </fullcontact><canreinvite>no </canreinvite><dtmfmode>rfc2833 </dtmfmode><callgroup>

 </callgroup><pickupgroup>
 </pickupgroup><fromuser>
 </fromuser><fromdomain>
 </fromdomain><trustrpid>no  </trustrpid><sendrpid>no  </sendrpid><insecure>no  </insecure><progressinband>never  </progressinband><videosupport>no  </videosupport><description>Test Device #1  </description><istrunk>0  </istrunk><cid_from_dids>0  </cid_from_dids><pin>  </pin><tell_balance>0  </tell_balance><tell_time>0  </tell_time><tell_rtime_when_left>60  </tell_rtime_when_left><repeat_rtime_every>60  </repeat_rtime_every><t38pt_udptl>no  </t38pt_udptl><regserver>  </regserver><ani>0  </ani><promiscredir>no  </promiscredir><timeout>60  </timeout><process_sipchaninfo>0  </process_sipchaninfo><allow_duplicate_calls>0  </allow_duplicate_calls><call_limit>0  </call_limit><lastms>0  </lastms><faststart>yes  </faststart><h245tunneling>yes  </h245tunneling><latency>0.0  </latency><grace_time>0  </grace_time><recording_to_email>0  </recording_to_email><recording_keep>0  </recording_keep><recording_email>
 </recording_email><record_forced>0  </record_forced><fake_ring>0  </fake_ring><save_call_log>0  </save_call_log><mailbox>  </mailbox><enable_mwi>0  </enable_mwi><authuser>
 </authuser><requirecalltoken>no  </requirecalltoken><language>  </language><use_ani_for_cli>false  </use_ani_for_cli><calleridpres>  </calleridpres><change_failed_code_to>0  </change_failed_code_to><reg_status>  </reg_status><max_timeout>0  </max_timeout><anti_resale_auto_answer>0  </anti_resale_auto_answer><qf_tell_balance>0  </qf_tell_balance><qf_tell_time>0  </qf_tell_time><time_limit_per_day>0  </time_limit_per_day><control_callerid_by_cids>  </control_callerid_by_cids><callerid_advanced_control>0  </callerid_advanced_control><transport>udp  </transport><subscribemwi>  </subscribemwi><encryption>no  </encryption><block_callerid>0  </block_callerid><tell_rate>0  </tell_rate><trunk>no  </trunk><proxy_port>0  </proxy_port><cps_call_limit>0  </cps_call_limit><cps_period>0  </cps_period><timerb>6400  </timerb><op>0  </op><op_active>0  </op_active><op_tech_prefix>  </op_tech_prefix><op_routing_algorithm>lcr  </op_routing_algorithm><op_capacity>500  </op_capacity><op_src_regexp>  </op_src_regexp><op_src_deny_regexp>  </op_src_deny_regexp><tp>0  </tp><tp_active>0  </tp_active><tp_tech_prefix>  </tp_tech_prefix><tp_capacity>500  </tp_capacity><tp_src_regexp>  </tp_src_regexp><tp_src_deny_regexp>  </tp_src_deny_regexp><defaultuser>101  </defaultuser><useragent>  </useragent><type>friend  </type><md5secret>  </md5secret><remotesecret>  </remotesecret><directmedia>  </directmedia><useclientcode>
 </useclientcode><setvar>
 </setvar><amaflags>
 </amaflags><callcounter>
 </callcounter><busylevel>
 </busylevel><allowoverlap>
 </allowoverlap><allowsubscribe>
 </allowsubscribe><maxcallbitrate>
 </maxcallbitrate><rfc2833compensate>
 </rfc2833compensate><session-timers>
 </session-timers><session-expires>
 </session-expires><session-minse>
 </session-minse><session-refresher>
 </session-refresher><t38pt_usertpsource>
 </t38pt_usertpsource><regexten>
 </regexten><defaultip>
 </defaultip><rtptimeout>
 </rtptimeout><rtpholdtimeout>
 </rtpholdtimeout><outboundproxy>
 </outboundproxy><callbackextension>
 </callbackextension><timert1>
 </timert1><qualifyfreq>
 </qualifyfreq><constantssrc>
 </constantssrc><contactpermit>
 </contactpermit><contactdeny>
 </contactdeny><usereqphone>
 </usereqphone><textsupport>
 </textsupport><faxdetect>
 </faxdetect><buggymwi>
 </buggymwi><auth>md5  </auth><fullname>
 </fullname><trunkname>
 </trunkname><cid_number>
 </cid_number><callingpres>
 </callingpres><mohinterpret>
 </mohinterpret><mohsuggest>
 </mohsuggest><parkinglot>
 </parkinglot><hasvoicemail>
 </hasvoicemail><vmexten>
 </vmexten><autoframing>
 </autoframing><rtpkeepalive>
 </rtpkeepalive><call-limit>
 </call-limit><g726nonstandard>
 </g726nonstandard><ignoresdpversion>
 </ignoresdpversion><allowtransfer>
 </allowtransfer><dynamic>
 </dynamic>
 <codecs>
  <audio_codecs>    </audio_codecs>
  <video_codecs>    </video_codecs>
 </codecs>
</page>

---

Errors

• <error>User not found</error> – User was not found.
• <error>user_id is empty</error> – user_id was not sent.
• <error>Bad login</error> – User was not found by username and password. Use correct username and password. Make sure that username (u) and password (p) are specified.
• <error>Incorrect hash</error> – Hash was not correct. Check API_Secret_Key and order or params while concatenating hash_string.

See also

• MOR API