Difference between revisions of "M4 Termination Points"

From Kolmisoft Wiki
Jump to navigationJump to search
Line 9: Line 9:
=Termination Point Settings=
=Termination Point Settings=


'''Act as Termination Point'''<br>
'''Act as Termination Point''' - turns on/turns of Termination Point. If selected No and saved, all settings of Termination Point will be erased<br>
'''Active'''<br>
'''Active''' - activates/deactivates Termination Point<br>
'''Tech. Prefix''' - technical prefix that is added to destination number when dialing through this termination point.<br>
'''Tech. Prefix''' - technical prefix that is added to destination number when dialing through this termination point.<br>
'''Tariff'''<br>
'''Tariff'''<br>

Revision as of 09:11, 30 July 2014

Description

Termination Point is connection to some final entity (device/line/trunk/provider/supplier/etc) where call will be terminated.

Call comes from Origination Points and goes to Termination Point.

Termination Points are assigned to Dial Peers.

Termination Point Settings

Act as Termination Point - turns on/turns of Termination Point. If selected No and saved, all settings of Termination Point will be erased
Active - activates/deactivates Termination Point
Tech. Prefix - technical prefix that is added to destination number when dialing through this termination point.
Tariff
Capacity - limits the number of concurrent calls to this termination point.
Source (CallerID) Allow - regular expression (regexp) for CallerIDs that are allowed to go through this termination point (use regexp .* if you want to allow all CallerIDs to go through this termination point).
Source (CallerID) Deny - regular expression (regexp) for CallerIDs that are NOT allowed to go through this termination point (leave empty if you do not want to disallow any CallerIDs).
Register - should we register the provider?
Login/Username - username if your provider asks for it.
Password - password used for authentication by your provider.


See also