Difference between revisions of "I have a problem with Call Flood"

From Kolmisoft Wiki
Jump to navigationJump to search
m
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
If in active calls you see a lot of pending calls an none of them are connecting:
If in active calls you see a lot of pending calls an none of them are connecting:


[[File:flood.jpg]]
[[File:flood.jpg| 500px]]


This can indicate that asterisk is overloaded, in such case setting the "maxload" value in asterisk.conf should solve the issue.
This can indicate that asterisk is overloaded, in such case setting the "maxload" value in asterisk.conf should solve the issue.
What you should do:
What you should do:
1. Open asterisk.conf file with any editor:
1. Open asterisk.conf file with any editor:


  vi /etc/asterisk/asterisk.conf
  vi /etc/asterisk/asterisk.conf


2. Add or edit the "maxload" line, sett the value to be equal to the number of cores one your server (or lover).
2. Add or edit the "maxload" line, set the value to be equal to the number of cores one your server (or lower).
   
   
  maxload = "number of cores"
  maxload = "number of cores"

Latest revision as of 17:08, 15 July 2014

If in active calls you see a lot of pending calls an none of them are connecting:

Flood.jpg

This can indicate that asterisk is overloaded, in such case setting the "maxload" value in asterisk.conf should solve the issue. What you should do:

1. Open asterisk.conf file with any editor:

vi /etc/asterisk/asterisk.conf

2. Add or edit the "maxload" line, set the value to be equal to the number of cores one your server (or lower).

maxload = "number of cores"

3. Restart asterisk:

service asterisk restart